GRUNDIG GSV Dishwasher
leave the door of your machine ajar
during this period. This process will
increase the drying effectiveness of
your machine.
Adjusting the amount of rinse aid
1. After switching on your machine, press
the Menu key for 3 second.
Some models require pressing Menu
key once to enter settings menu.
Water cut-off warning
2. Using <- and +> keys, proceed to “P:” on
the display.
If mains water is cut or water inlet tap is
turned off the machine cannot take water in
and E:02 icon will flash on the programme
indicator. As long as the problem continues,
washing programme is paused and the
water inlet is checked regularly by the
machine; when the water is restored E:02
icon will disappear after a while and the
washing programme resumes.
3. Set to the appropriate level with the
Selection key.
4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
position.
Overflowing warning
3 doses of rinse aid are dispensed in P:3
If the machine intakes too much water or
there is leakage at any of the components
then the machine will detect this and E:01
icon will flash on the Programme indicator.
As long as the overflowing continues safety
algorithm will be active and try to discharge
the water. If overflowing stops and safety
is assured, E:01 icon will disappear. If E:01
does not disappear, there is a permanent
fault. In this case the authorised service
should be contacted.
position.
4 doses of rinse aid are dispensed in P:4
position.
End of programme
When the programme you have
selected comes to an end, an audible
warning signal will warn you to turn off
your machine. This audible signal will
warn you with certain intervals before it
turns off.
End of Programme indicator will light up
when the washing programme is over.
1. Open the door of the machine.
SelfCare
(depends on model)
This programme is recommended to be
operated on each 1-2 months for machine
cleaning and necessary hygiene. The
programme should be operated while the
machine is empty.
In order to achieve an efficient result, it is
recommended to use together with special
machine cleaning agents.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
For energy saving, the machine is
automatically turned off following the
completion of the programme or if the
programme is not started.
Do not use this programme to
clean dishes. As it operates in high
temperatures, it is harmful for the
dishes.
Leave your dishes in the machine for
about 15 minutes to allow them cool
down after they are washed. Your
dishes will dry in a shorter time if you
33/EN
| General | Details |
|---|---|
| Name | GRUNDIG GSV Dishwasher |
| Make | GRUNDIG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.46 MB |
(1 votes, average: 5.00 out of 5)
Loading...
GRUNDIG GR5500 Dishwasher
GRUNDIG GNFP3440X Dishwasher
GRUNDIG GSV 428420 Dishwasher
GRUNDIG GSV 42840 Dishwasher
FISHER PAYKEL DD24DDFTB9_N Double Dishwasher
BOSCH SMS6ZDI08E Dishwasher
InDeSIT DFE 1B19 X Dishwasher
Monsher MD 4502 Dishwasher
BOSCH SMV4HCX52E-39 Dishwasher
Electrolux ESA12100SW Dishwasher
Bertazzoni DW24T3IXV Dishwasher
BOSCH SMD6YCX01G Dishwasher
BOSCH SHX65CM5N Dishwasher
LG LDTH7972D Smart Dishwasher