Hotpoint QEUO18 Dishwasher
Daily Reference Guide
EN
PROGRAMS TABLE
Duration
of wash
program
Water
Energy
Available
options *)
Program
Programs description
consumption consumption
(litres/cycle) (kWh/cycle)
(h: min)**)
Eco 50°- Program is suitable to clean normally soiled tableware,
that for this use, it is the most efficient program in terms of its
combined energy and water consumption, and that it is used to
assess compliance with the EU Ecodesign legislation.
3:30
9.5
0.75
P1
Auto Intensive 65° - Automatic program
for hevily soiled dishes and pans.
2:25 - 3:10
1:20 - 3:00
15.5 - 24.5
7.5 - 19.5
1.30 - 1.70
0.75 - 1.20
P2
P3
Senses the level of
soiling on the dishes
and adjusts the
Auto Mixed 55° - Automatic program
for normally soiled dishes with dried food
residues.
program according-
ly. When the sensor
is detecting the soil
level an animation
appears in the
Auto Fast 50° - Automatic program for
normally and lightly soiled dishes.
The everyday cycle that ensures optimal
cleaning and drying performance in short-
er time.
1:00 - 1:50
7.5 - 15.5
0.70 - 1.10
P4
display and the cycle
duration is updated.
Rapid 45° - Program to be used for half load of lightly-soiled dishes
0:30 - 0:40
1:40 - 1:50
10.0 - 12.0
12.5 - 16.5
0.55 - 0.65
0.95 - 1.20
P5
P6
-
with no dried food residues. Does not include the drying phase.
Delicates 45° - Program for delicate items, which are more sen-
sitive to high temperatures, for example, glasses and cups.
Good Night 55° - Suitable for night-time operation of the
appliance. Ensures optimal cleaning and drying performance
with the lowest noise emission.
3:50 - 4:10
10.5 - 14.5
0.80 - 1.15
P7
Sanitizing 65° - Normally or heavily soiled crockery, with addi-
tional antibacterial wash. Can be used to perform maintenance
of the dishwasher.
1:55 - 2:10
0:12
12.0 - 19.0
4.5
1.40 - 1.80
0.10
P8
P9
-
Soak - Use to refresh crockery planned to be washed later.
No detergent is to be used with this program.
-
-
Self Clean 65° - Program to be used to perform maintenance
of the dishwasher, to be carried out only when the dishwasher
is EMPTY using specific detergents designed for dishwash-
er maintenance.
1:15
11.0
1.10
P10
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up) (see
CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will
sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
3D ZONEWASH - Thanks to the additional power jets this option provides
up to 80% more water power, more intensive and powerful wash in the
lower rack, in the specific bottom area.This option is recommended for washing
pots and casseroles (Please refer to the 3D loading section).
LIGHT ON THE FLOOR - A LED light projected on the floor indicates
that the dishwasher is working. The light goes off at the end of a cycle.
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
ActiveDry - It is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying per-
formance every day. Door opens at the temperature that is safe to your
kitchen furniture.
HALF LOAD - If there are not many dishes to be washed, HALF LOAD is
used to save water, electricity or time depending on the selected program.
Remember to reduce the amount of detergent.
EXTRA DRY - A higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
As additional steam protection, special designed protection foil is added
together with the dishwasher.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in the“SET-
TINGS MENU”.
DELAY - The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
DESCALE - Alarm - Limescale accumulation was detected on the
internal components of the appliance. Check if the Water Hardness
Setting is at the correct value and salt is present in the salt container (see
FIRST TIME USE), then use a descaling product (WPro brand is recommended)
with the Self-Clean program. After a successful descaling, the icon will stop
being displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display) and
then will be BLOCKED to prevent component damage, with only the Self-
Clean program available. Performing a full descaling will unblock the
product. In the case of extremely high amounts of limescale, descaling may
have to be performed twice to be efficient.
2. Press the START/Pause button and close the door within 4 sec. the timer
will begin counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
FAVOURITE - The FAVOURITE program may be saved and will be easy
accessible. Find the program using PREVIOUS / NEXT , and then
press the FAVOURITE program button for 3 seconds.
WATER TAP CLOSED – Alarm - Flashes, when there is no inlet water or
water tap is closed.
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the
dishes and it is present for all cycles (excepting Eco) adjusting the
program accordingly.
3
| General | Details |
|---|---|
| Name | Hotpoint QEUO18 Dishwasher |
| Make | Hotpoint |
| Language | English |
| Filetype | PDF (Download) |
| File size | 8.98 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
FOTILE BD2BV01 Dishwasher
SAMSUNG DW9000F Dishwasher
FISHER PAYKEL DD24SCTB9N Sanitize Tall Dishwasher
FISHER AND PAYKEL DD60SHI9 Dishwasher
FISHER PAYKEL DW60UT4I2 Tall Dishwasher
Whirlpool W11703656 Dishwasher
element ENB6631PEBB 18 Inch Dishwasher
Fisher and Paykel DW60UN2X2 Built-Under Dishwasher
GE Profile PDP715SYV Profile Dry Boost 24 in Smart Dishwasher
BOSCH SMT6EB801E Fully Integrated Dishwasher