IKEA KALLBODA Dishwasher
9
During the drying phase moisture from the interior of the
dishwasher is stored in the mineral and heat energy is re-
leased. The heat energy is blown out into the interior of the
dishwasher with dry air. This speeds up and improves dry-
ing.
Sensors
The sensors adjust the programme sequence and strength
in the automatic programmes depending on the level and
type of soiling.
The sensor has different sensitivity settings that can be
changed in the basic settings.
This drying method saves a great deal of energy.
Tip: To avoid impairing the drying performance, do not posi-
tion items of tableware directly in front of the intake open-
ing or the blow opening of the container.
SENSOR SETTING
DESCRIPTION
SE:00
Optimum setting for a mixed load
and heavily soiled tableware.
Saves both energy and water.
Adjusts the programme strength
for effective removal of food rem-
nants even with low soiling levels.
Energy and water consumption
are adjusted accordingly.
Do not position heat-sensitive items of tableware directly in
front of the blow opening of the container.
SE:01
SE:02
Aqua sensor
The aqua sensor is an optical measuring device (light bar-
rier) which measures the turbidity of the washing water. You
can save water with the aqua sensor.
Use of the aqua sensor depends on the programme. If the
soiling level is high, the rinsing water is drained off and re-
placed with fresh water. If the soiling level is lower, the rins-
ing water is used in the next wash cycle, so reducing water
consumption by 3-6 litres. In the automatic programmes the
temperature and running time are additionally adjusted to
the level of soiling.
Adjusts the programme strength
for difficult conditions of use, e.g.
stubborn dried-on food remnants.
Recommended setting when using
organic or ecological detergents
containing low levels of active
agents. Energy and water con-
sumption are adjusted accord-
ingly.
I
t
c
t
Installation and connection
I
t
c
t
To ensure proper operation, connect the appliance to the
power and water supply correctly. Observe the specified cri-
teria and the installation instructions.
4. Consult the installation instructions for the installation di-
mensions required.
5. Make the appliance level using the height-adjustable feet.
Make sure that the appliance is standing on the floor se-
curely.
Scope of supply
8. Connect the appliance to the power supply.
After unpacking all parts, check for any damage in transit
and completeness of the delivery.
If you have any complaints, contact IKEA or our Customer
Service.
Note: The appliance has been tested at the factory to check
it is in working order. It is possible that water has left marks
on the appliance. These marks will disappear after the first
wash cycle.
Drainage connection
Connect your appliance to drainage connection so dirty wa-
ter is discharged via the wash cycle.
Installing the drainage connection
The delivery consists of the following:
● Dishwasher
● Operating instructions
● Installation Instructions
● Installation material
● Steam protection
1. Consult the installation instructions supplied for the steps
required here.
2. Connect the wastewater hose to the outlet connection of
the siphon using the enclosed parts.
3. When doing so, check that the wastewater hose is not
● Salt filling aid funnel
● Mains cable
kinked, crushed or twisted.
4. Also check that there is no cover in the drainage system
preventing the wastewater from being discharged.
Installing and connecting the appliance
Drinking water connection
Connect your appliance to a drinking water connection.
You can position your built-under or integrable appliance in
a fitted kitchen between wooden and plastic walls. If you
subsequently install your dishwasher as a free-standing ap-
pliance, you must stop it from tipping over, e.g. by screwing
it to the wall or installing it under a continuous worktop that
is securely connected to adjacent cabinets.
Installing the drinking water connection
Note
● If you are replacing the appliance, you must use a new
water supply hose.
1. Consult the installation instructions supplied for the steps
required here.
3. Check the Scope of supply and the condition of the appli-
2. Connect the appliance to the drinking water connection
ance.
using the enclosed parts.
| General | Details |
|---|---|
| Name | IKEA KALLBODA Dishwasher |
| Make | Ikea |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.85 MB |
(1 votes, average: 5.00 out of 5)
Loading...
IKEA 404.755.53 Medelstor Dishwasher
IKEA 804.621.67 Lagan Dishwasher
IKEA RENGÖRA 204.756.05 Dishwasher
IKEA 9001774317 TORSBODA Dishwasher
IKEA 9001774318 Dishwasher
IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher
IKEA VILLBODA Dishwasher
IKEA 504.754.25 HYGIENISK Dishwasher
IKEA AA-2412057-2-1 RÅGLANDA Dishwasher
IKEA RANSBERG Dishwasher
FISHER PAYKEL DD24DCTW9 N
RESPEKTA GSP60IBATIDM Dishwasher
COVE DW2451 Dishwasher
GE Profile PDP715SYV Profile Dry Boost 24 in Smart Dishwasher
BOSCH SHS53CD2N Scoop Handle Dishwasher
ASKO D5233 Dishwasher
FISHER PAYKEL DD60D2HNB9 Built-under Dishwasher
BOSCH 9001884369 Dishwasher
Whirlpool 400011659130 Dishwasher
kogan com KABNCTPDW8B Benchtop Dishwasher