INSIGNIA NS-DWH1SS9 Dishwasher
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Make sure that the water pressure is above 20 psi
The water pressure is too low. (138 kPa). Use your dishwasher when water
demand is low.
Make sure that the dishwasher is connected to a
hot water supply. If not, change the water supply to
The inlet water temperature
a hot water source.
is too low.
Use your dishwasher when hot water demand is
low.
Reload the dishwasher as shown in "Preparing and
Dishes are too close together.
The dishes are not clean
enough
loading dishes" on page 8.
Add detergent depending on the water hardness
Improper use of detergent. and washing cycle you choose. Use fresh
detergent.
The selected cycle is not
Choose a different cycle with a longer washing
suitable for the soil level on
time.
the dishes.
Make sure that the spray arms are not blocked and
The spray arms are blocked.
are free to rotate.
The rinse aid dispenser is
Fill the rinse aid dispenser.
empty or the setting is too
Increase the rinse aid setting.
low.
The dishes are not drying
enough
Dishes are loaded
improperly.
Reload the dishwasher as shown in "Preparing and
loading dishes" on page 8.
The cycle you chose did not
include drying.
Choose a cycle with drying.
Water hardness is too high
For extremely hard water, install a water softener.
Dishes are loaded
improperly.
Reload the dishwasher as shown in "Preparing and
loading dishes" on page 8.
Old or damp rinse aid power
is used.
Spots and filming on dishes
Use fresh, liquid rinse aid.
The rinse aid dispenser is
empty or the setting is too
low.
Fill the rinse aid dispenser.
Increase the rinse aid setting.
Using too much detergent. Use less detergent if you have soft water.
Etching
The inlet water temperature
Lower the inlet water temperature.
exceeds 150° F (65.6° C).
Detergent may be too old.
The spray arm is blocked.
Use fresh detergent.
Detergent left in dispenser
cup
When you load the dishes, make sure that the spray
arms are not blocked.
Add detergent and rinse aid only as indicated in
this manual. See “Filling the detergent dispenser”
and "Filling the rinse aid dispenser" on page 10.
The detergent dispenser will Improper operation of the
not close
detergent cover.
The previous cycle has not
finished or has been
interrupted.
Water remains in the
dishwasher.
Make sure that the current cycle is finished.
Check the air gap (if so equipped).
Make sure that the garbage disposal is empty (if so
connected).
The drain is clogged.
The dishwasher does not
drain properly.
Make sure that the drain hose is not kinked and is
properly connected.
The drain hose is kinked.
Using improper detergent.
Make sure to use only automatic dishwasher
detergent.
Suds in the tub
Excessive suds caused by
using improper detergent.
Make sure to use only automatic dishwasher
detergent.
The dishwasher leaks
Level the dishwasher (refer to the Installation
Manual).
The dishwasher is not level.
16
| General | Details |
|---|---|
| Name | INSIGNIA NS-DWH1SS9 Dishwasher |
| Make | Insignia |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.61 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INSIGNIA NS-DWF2SS3 Dishwasher
INSIGNIA NS-DWH2SS8 Dishwasher
INSIGNIA NS-DWRF2SS3 Front Dishwasher
INSIGNIA NS-DWR3SS1 Dishwasher
NEFF S257ECX21E Dishwasher
SIEMENS SN85TX00CE Dishwasher
WISBERG WBDW44DB Dishwasher
ggmgastro GLOZ50 Undercounter Dishwasher
BOSCH SMV6HVX01I Dishwasher
FISHER AND PAYKEL DW60UN2B2 Built Under Dishwasher
Miele G5000 Gas Range Dishwasher
BOSCH SMV50M00EU Fully Integrated Dishwasher
UNIQUE APPLIANCES UGP-24CR DW W Dishwasher
Hotpoint HFC 3C26 WC Dishwasher