JOCEL JLLI023124 Dishwasher
ADVICE REGARDING THE FIRST WASH CYCLE
After the appliance has been installed, immediately before running the first wash cycle,
completely fill the salt dispenser with and add approximately 1.2 Kg of salt (see Rinse aid
and refined salt). The water may overflow: this is normal and is not a cause for concern. It
is also normal that the LOW SALT indicator light continues to flash for a few cycles after the
salt has been loaded.
POSITIONING THE APPLIANCE
Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water
supply and drain hoses that can be positioned to the right or the left to facilitate proper
installation.
LEVELING THE APPLIANCE
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the
height of the dishwasher, making it level. In any case, the appliance should not be inclined
more than 2.
NOTE: The maximum adjustment height of the feet is 20 mm.
HOW TO DRAIN EXCESS WATER FROM HOSES
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excess water from hoses into a bowl or a
suitable container that is held outside and lower than the sink.
WATER OUTLET
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
EXTENSION HOSE
If you need a drain hose extension, observe to use a similar drain hose.
It must be no longer than 4 metres; otherwise, the cleaning effect of the dishwasher could
be reduced.
SYPHON CONNECTION
The waste connection must be at a height of between 50cm (minimum) and 100cm
(maximum) from the bottom of the dish. The water drain hose should be fixed by a hose clip.
98
START OF DISHWASHER
The followings should be checked before starting the dishwasher:
1. Whether the dishwasher is level and fixed
2. Whether the inlet valve is opened
3. Whether there is leakage at the connections of the conducts
4. Whether the wires are tightly connected
5. Whether the power is switched on
6. Whether the inlet and drain hoses are knotted
7. All packing materials and printings should be taken out from the dishwasher
ATTENTION
After installation, please put this manual into the bags of printings.
The content of this manual is very helpful to the users.
TROUBLESHOOTING TIPS
ERROR CODES
When some malfunctions happen, the appliance will display error codes to warn you.
WARNING!
If overflow occurs, turn off the main water supply before calling a service. If there is water in
the base pan because of an overfill or small leak, the water should be removed before
restarting the dishwasher.
AVAILABILITY OF SPARE PARTS
1. Seven years after placing the last unit of the model on the market: Motor, circulation and
drain pump, heaters and heating elements, including heat pumps (separately or
bundled), piping and related equipment including all hoses, valves, filters and aqua
stops, structural and interior parts related to door assemblies (separately or bundled),
99
| General | Details |
|---|---|
| Name | JOCEL JLLI023124 Dishwasher |
| Make | JOCEL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.44 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Fisher and Paykel DW60FC2X1 Dishwasher
BOSCH SMD8YCX02G Dishwasher
BOSCH SBV4EVX08E65 Dishwasher
FISHER AND PAYKEL DD24DHTI9N Dishwasher
smeg LSPU8653X 24″ Fingerprint Resistant Dishwasher
Thronwhirlpool 600-601 Dishwasher
FISHER AND PAYKEL DD24SI9 Dishwasher
Electrolux EEC67310L Comfortlift Airdry Total Integrated Dishwasher
EQUATOR 1840 18 Inch Dishwasher
CMA H-1X Undercounter Dishwasher