Home > KKT KOLBE > KKT KOLBE DW4505FS Dishwasher

KKT KOLBE DW4505FS Dishwasher

Installation of the Appliance  
6.2 Water connection  
Important notes and instructions before connecting  
the water supply  
• Pipe installations and changes to the water supply  
should be carried out by a certified installation specialist!  
• Note that a safety device against drinking water contamination  
due to backflow must be installed for the connection  
to the drinking water supply (according to DIN EN 1717)!  
• If the water connection pipes are new or have not been used  
for a long period of time, let the water run and make sure  
that it is clear and free of impurities!  
• Do not reuse old or used hose sets for installation!  
• If your sink has a hose, it must not be installed on the same  
water pipe as the dishwasher, otherwise it may burst!  
If necessary, disconnect it and close the opening.  
ꢂSafetyꢁhoseꢁ/ꢁAquastop  
The supplied safety supply hose is double-walled  
and leak-proof (Aquastop).  
If the supply hose breaks or if the space between the supply  
hose and the outer corrugated hose fills with water,  
an interlock is activated which blocks the water supply.  
Connecting the appliance to the cold water supply  
• Pull The safety supply hoses completely out of the  
storage compartment located at the rear side of the dishwasher.  
• Tighten the screws of the safety supply hose  
to the cold water tap with thread 3/4 inch.  
Make sure that it is firmly seated and tightly closed.  
• Turn the water fully on before starting the dishwasher.  
53  
GeneralDetails
NameKKT KOLBE DW4505FS Dishwasher
MakeKKT KOLBE
LanguageEnglish
FiletypePDF (Download)
File size9.7 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
KKT KOLBE DW616FS Dishwasher
KKT KOLBE DW616FS Dishwasher

KKT KOLBE DW4505FS Dishwasher