kleenmaid DW6020XB Black /Built Under Dishwasher
The dishes were not
loaded correctly.
See " Loading the Dishwasher Baskets " on page 11.
Select a more intensive program. See " Wash Cycle
The program was
Table " on page 15.
not powerful enough.
Not enough detergent
was dispensed.
Use more detergent, or change your detergent.
Items are blocking
the path of spray arms.
Rearrange the items so that the sprayer can rotate
freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the
Spray Arms" on page 18.
The filter combination
is not clean or
is not correctly fitted.
This may cause
the spray arm jets to
get blocked.
Combination of soft
water and too much
detergent.
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Aluminum utensils
have rubbed against
dishes.
Use a mild abrasive cleaner to eliminate those marks.
Dishes blocking detergent
Re-loading the dishes properly.
cup openening.
See " Loading the Dishwasher Baskets " on page 11.
Improper loading
Too little rinse-aid
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once the
dishes are barely warm by touching. Empty the low
basket first. This prevents water from dropping off
dishes in the upper basket.
Dishes are removed
too soon
With a short program, the washing temperature is
lower, decreasing cleaning performance. Choose a
program with a longer washing time.
Wrong program
has been selected
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher. See page 11 .
Use of cutlery with
a low-quality coating
When some malfunctions occur, the appliance will display error codes to alert the user. These will
continue to flash until the dishwasher is manually turned off.
Rapid program
indicator flashes
Dishwasher taking longer than normal to fill
with water
Tap is not opened, or water intake is
restricted,or water pressure is too low.
90min & Rapid program
Not reaching required temperature
Malfunction of heating element.
indicators flash
Glass program
indicator flashes
Overflow
Some element of dishwasher leaks.
NOTE: To save energy, in stand by mode, the appliance will switch off automatically when there is no operation after 30
minutes .
If overflow occurs, turn off the main water supply before calling for service.
If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
24
| General | Details |
|---|---|
| Name | kleenmaid DW6020XB Black /Built Under Dishwasher |
| Make | kleenmaid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.96 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Kleenmaid DW6020XB Black Built Under Dishwasher
kleenmaid DW6032 Dishwasher
KLEENmaid DW6031 Dishwasher
KLEENmaid DW4531 45cm Dishwasher
kleenmaid DW6020X Dishwasher
kleenmaid DW6032 Semi Integrated Dishwasher
FISHER AND PAYKEL DD60DTX6HI1-CN Tall Dishwasher
FISHER AND PAYKEL DD60SHTI9 Dishwasher
FOTILE BD2BV01 Dishwasher
aspes AJ14600BD Dishwasher
gorenje GI62040X Dishwasher
BOSCH SPV4EMX62E Dishwasher
BOSCH SPI4HKS49E Integrated Dishwasher
BOSCH SHX4AEF5N Smart Dishwasher
FISHER PAYKEL DD24DT4NX9 Contemporary Series Drawer Dishwasher
IKEA LAGAN Integrated Dishwasher