Home > Kuppersberg > Kuppersberg GSM 6074 Dishwasher

Kuppersberg GSM 6074 Dishwasher

TECHNICAL PASSPORT  
Dishwasher  
ENGLISH  
Step 3. Tension adjustment of the door spring  
1. The door springs are set at the  
factory to the proper tension for the  
outer door. If aesthetic wooden panel  
are installed, you will have to adjust  
the door spring tension. Rotate the  
adjusting screw to drive the adjustor to  
strain or relax the steel cable.  
2. Door spring tension is correct  
when the door remains horizontal in  
the fully opened position, yet rises to a  
close with the slight lift of a finger.  
Step 4. Dishwasher installation steps  
Please refer to the specified installation steps in the installation drawings.  
1. Affix the condensation strip dishwasher use an Philips screw. To  
under the work surface of cabinet. adjust the front feet, use a flat screw  
Please ensure the condensation strip is driver and turn the front feet until the  
flush with edge of work surface.  
dishwasher is level.  
2.  
Connect the inlet hose to the  
7.  
Install the furniture door to the  
cold water supply.  
3. Connect the drain hose.  
outer door of the dishwasher.  
8. Adjust the tension of the door  
springs by using an Allen key turning in  
4.  
Connect the power cord.  
5. Place the dishwasher into a clockwise motion to tighten the left  
position.  
and right door springs. Failure to do this  
6. Level the dishwasher. The rear could cause damage to your dishwasher.  
food can be adjusted from the front of  
9. The dishwasher must be  
the dishwasher by turning the Philips secured in place. There are two ways to  
screw in the middle of the base of do this:  
72  
GeneralDetails
NameKuppersberg GSM 6074 Dishwasher
MakeKuppersberg
LanguageEnglish
FiletypePDF (Download)
File size13.35 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Kuppersberg GSM 6074 Dishwasher