Whirlpool WDFS3L5PBSSG Free Standing Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

WDFS3L5PBSSG  

WDFS3L5PIXSG  

INSTALLATION GUIDE, SAFETY INSTRUCTIONS  

AND DAILY REFERENCE GUIDE  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Whirlpool WDFS3L5PBSSG Free Standing Dishwasher
Make	Whirlpool
Language	English
Filetype	PDF (Download)
File size	7.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Whirlpool

Whirlpool WDFS3L5PBSSG Free Standing Dishwasher Overview

Summary of Contents

• Page 1: Installation guide, safety instructions and daily reference guide.
• Page 2: Installation guide Safety instructions Daily reference guide Control panel First time use Daily use Advice and tips Programs table Options and functions Care and maintenance
• Page 3: Installation guide Minimum pressure: 0.05 MPa/0.5 Bar Maximum pressure: 1 MPa/10 Bar Minimum distance: 10 mm Minimum height: 25 mm Dimensions: ~1300 mm Dimensions: ~1500 mm
• Page 4: Page 4
• Page 5: Safety instructions are important to be read and observed. Use only detergent and rinse additives designed for an automatic dishwasher. Store detergent, rinse aid, and salt out of reach of children. Shut off the water supply and disconnect power before servicing. Very young children should be kept away from the appliance. Installation must be handled by two or more persons to avoid injury. Use protective gloves during unpacking and installation. The appliance must be connected to the water mains using only new hose sets. Installation and repairs must be carried out by a qualified technician. The appliance is intended for household use only and not for professional use.
• Page 6: Disposal of household appliances This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. Electrical warnings The rating plate is on the edge of the dishwasher door. It must be possible to disconnect the appliance from the power supply. Energy saving tips ECO program is suitable to clean normally soiled tableware and is the most efficient program in terms of energy and water consumption. Cleaning and maintenance Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation. Disposal of packaging materials The packaging material is 100% recyclable and must be disposed of responsibly in compliance with local authority regulations.
• Page 7: Daily Reference Guide Thank you for buying a Whirlpool product. Before using the appliance, carefully read Safety and Installation Instructions. After installation, please remember to remove all transport protection parts from the dishwasher. Control Panel includes various buttons with indicator lights for different functions. First Time Use involves switching on the appliance and adjusting settings. Water Hardness Table provides information on different levels of water hardness. The use of salt prevents the formation of limescale on the dishes and on the machine’s functional components. Rinse aid makes dish drying easier and should be filled when the Rinse Aid Refill indicator light is lit. It is mandatory that the salt reservoir never be empty. To allow the water softener to work effectively, the water hardness setting must match the actual water hardness in your house.
• Page 8: The detergent dispenser automatically opens at the right time according to the program. Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance. To open the detergent dispenser, use the opening device. Introduce the detergent into the dry dispenser only. Check that the dishwasher is connected to the water supply and that the tap is open. If a wrong program was selected, it is possible to change it, provided that it has only just begun. Start the wash cycle by closing the door and pressing the start/pause button. The end of the wash cycle is indicated by sound and the display shows END. Before loading the baskets, remove all food residues from the crockery. To avoid odour and sediment, run a high-temperature program at least once a month.
• Page 9: Daily Reference Guide Programs table Eco 50° - Environmentally friendly wash cycle with low energy consumption level. Standard cycle suitable to wash normally soiled load. Auto Intensive 65° - Automatic program for heavily soiled crockery, especially for pots and saucepans. Auto Mixed 55° - Automatic program for mixed soiled dishes with dried food residues. Rapid 45° - Program to be used for lightly soiled dishes with not dried food residues. Does not include the drying phase. Self-Clean 65° - Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is empty. Options and functions Power Clean® - Provides a more intensive and powerful wash in the lower rack. Delay - The start of the program may be delayed for a period of time between 0:30 and 24 hours. Half Load - Used to save water, electricity, or time when there are not many dishes to be washed. Sani Rinse - This option can be used to sanitize washed dishes by increasing the final rinse temperature.
• Page 10: Capacity: 15 standard place-settings The third rack was designed to house the cutlery. Arrange the cutlery as shown in the figure. A separate arrangement of the cutlery makes collection easier after washing and improves washing and drying performance. The lower rack has tip-up supports which can be used in a vertical position when arranging plates or in a horizontal position to load pans and salad bowls easily. Load delicate and light dishes: glasses, cups, saucers, low salad bowls. The height of the upper rack can be adjusted to create more space upwards and avoid collision with items loaded into the lower rack. Power Clean® uses special water jets to wash highly dirty items more intensively. Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. The dishwasher must not be used without filters or if the filter is loose.
• Page 11: Daily Reference Guide Cleaning the spray arms The lower spray arm may be removed by pulling it upwards and rotating it anti-clockwise. It is recommended to check the arms from time to time and clean them with a small non-metallic brush. The top spray arm may be removed by pressing it up and then rotating it anti-clockwise. Troubleshooting In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. Refill the reservoir with salt if the salt indicator is lit or blinking. Rinse aid dispenser is empty if the rinse aid indicator is lit or blinking. Descale the appliance immediately if the descale indicator is lit or blinking. The dishwasher won’t start or does not respond to commands if the door is not closed. Position the crockery correctly if dishes are rattling against each other. Clean the filter and descale the appliance if the dishwasher won’t drain. The detergent has not been measured out correctly if the dishwasher makes excessive noise. Make sure the cap of the rinse aid dispenser is closed if the dishes are not clean. Fill the salt reservoir if the salt reservoir is empty.
• Page 12: Problems possible causes and solutions No water in the water supply or the tap is closed. Make sure there is water in the water supply and the water tap is open. The dishwasher does not fill the water. The water inlet hose is kinked. Check the inlet hose. The screen in the water inlet hose is clogged; it is necessary to clean it. Check and clean the screen in the water inlet hose. The filter is clogged with food residues or limescale. Clean the filter and descale the appliance. The dishwasher finishes the cycle prematurely. Check if the end of the drain hose is placed at the correct height. The detergent has not been measured out correctly or it is not suitable for use in dishwashers. An excessive amount of foam is present. Rinse aid is not present or the dosage is too low. Make sure the rinse aid dispenser is filled. The dishes are not dried well. Make sure the cycle has ended before starting to unload the dishes. The selected cycle does not have the drying phase. A cycle without the drying phase may not deliver desired drying efficiency. The salt reservoir is empty. Refill the reservoir with salt as soon as possible.