Home > Master Kitchen > Master Kitchen FI60514 Dishwasher

Master Kitchen FI60514 Dishwasher

Built-in model  
Install the hook on the aesthetic wooden panel (see figure 4) and put the hook into  
the slot of the outer door of dishwasher (see figure 4). After positioning of the panel ,  
press top of the aesthetic wooden panel to make sure that the plastic hook are  
fastened.  
A
B
Step 3. Adjusting the door spring tension  
1. The door springs are factory set to the correct  
tension for the outer door. When installing the  
decorative panel, adjust the door spring  
tension. Turn the adjusting screw to guide the  
regulator to stretch or relax the steel cable.  
2. The spring tension of the door is correct when  
the door remains in the fully open horizontal  
position, but is raised with the slight pressure  
of a finger.  
Step 4. Dishwasher installation steps  
Refer to the installation steps specified in the installation drawings.  
1. Fix the condensation strip under the countertop of the cabinet. Make sure the strip is  
levelled with the edge of the countertop. (Step 2)  
2. Connect the supply hose to the cold water source.  
3. Connect the draining pipe.  
4. Connect the power cord.  
5. Place the dishwasher in the right position. (Step 4)  
20  
GeneralDetails
NameMaster Kitchen FI60514 Dishwasher
MakeMaster Kitchen
LanguageEnglish
FiletypePDF (Download)
File size0.91 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Master Kitchen 340965 Drawer Dishwasher
Master Kitchen 340965 Drawer Dishwasher

Master Kitchen FI60514 Dishwasher