MDW 14-BS10TFT Dishwasher
Before Initial Use
and rotate the cap of the salt container an-
• Check if electricity and supply water prop-
erties are in compliance with the values
specified in the installation instructions.
• Remove all packaging material in the ap-
pliance.
ti-clockwise (Figures 1 and 2) to remove it.
1
2
• Adjust the amount of softener according
to the hardness of the water.
• Add 1 kg of salt and water into the salt
container until it overflows.
• Fill the rinse aid container.
Preparing the Machine for Use
Importance of the water softening system
For a good washing function, your dish-
washer needs soft water, i.e. water with less
lime. Otherwise white lime deposits will be
observed on internal components of your
appliance and on your dishes.
Fill the container with 1 kg salt and water until
it overflows in the initial use (Figure 3).You
can use a salt cone (if any) for an easier filling
process (Figure 4). Attach the cap again and
close it tightly by turning.
3
This will negatively affect the washing,
drying and rinsing performance of your
appliance. Water is cleaned of ions caus-
ing hardness when they pass through the
system and the water reaches the softness
required for the best washing result. De-
pending on the hardness level of the inlet
water, ions causing this hardness accumu-
late in the water softener system quickly.
Therefore, the softener system must be
cleaned to get the same performance
from the next wash. Dishwasher salt is used
for this purpose.
4
If the insufficient salt warning lamp on the
control panel is lit, add salt into the container
again. Fill the salt container with water only
for the initial use. It is recommended to use
powder softening salt or salt with small gran-
ules. Do not use table salt in your appliance.
Otherwise, the softener container may lose
its function in time. When you operate your
dishwasher, the salt container and the inter-
nal container that includes the salt container
will be filled with water. Therefore, add the
softening salt before starting the dishwasher.
If you are not going to wash the dishes right
away, run a short washing programme when
the appliance is unloaded to prevent damage
to appliance by the salt overflowed when fill-
ing the salt container (to prevent corrosion).
Filling the salt
Use special softening salt produced only for
use in dishwashers in your appliance. To add
the softening salt, first of all, remove the lower
basket
15
| General | Details |
|---|---|
| Name | MDW 14-BS10TFT Dishwasher |
| Make | MDW |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.36 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SBV4ECX30E-01 Dishwasher
BOSCH SMV4HTX00E Fully Integrated Dishwasher
Miele G5210 Active Plus Dishwasher
PKM GSP12A++7TI2 Dishwasher
BOSCH SMV6ZB806E Dishwasher
Bauknecht B7I HF60 Dishwasher
HEINNER HDW-BI4505IE++ Dishwasher
BOSCH SHP9PCL5N Custom Panel Dishwasher
BOSCH SMS4HVI00E Dishwasher
BOSCH SHP88PZ55N Fully Integrated Dishwasher