MDW 14-BS10TFT Dishwasher
PROBLEM
CAUSE
SOLUTION
Power cut.
Wait for the power to come.
Program may be in stand- Start the program by cancel-
by mode.
Appliance stops during
washing.
ling the standby mode.
Check if water hose is clog-
ged, clean the clogging.
Problem in water inlet.
Use required amount of
detergent.
Too little detergent.
Rinse aid setting is too
low.
Increase rinse aid setting.
Special salt is not used
although water hardness produced specially for your
Fill the appliance with salt
Dishes have whitish spots.
is high.
dishwasher.
Close the salt section cover.
Make sure it is closed pro-
perly.
Salt section cover is not
closed.
Check the programme
chapter in the manual and
A programme with no
drying process is selected. select a programme with
drying process.
Dishes do not dry.
Rinse aid dose is too low. Increase rinse aid setting.
Mains grounding is not
proper.
Have an electrician check
your mains grounding.
Make sure kitchenware used
in the dishwasher have suffi-
cient stainless steel quality.
Dishes have low stainless
steel quality.
Washing water salt level
is high.
Lower value of salt setting.
Dishes have rust marks.
Salt section cover is not
closed.
Close the salt section cover.
Make sure it is tightly closed.
Make sure salt does not
overflow during filling. Clean
the excessive salt by wiping
with a cloth.
Salt might be overflown
inside the appliance
during filling.
44
| General | Details |
|---|---|
| Name | MDW 14-BS10TFT Dishwasher |
| Make | MDW |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.36 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMS8YCI03E Dishwasher
Electrolux KECA7400W Builtin Dishwasher
AEG FSK53617Z Dishwasher
BOSCH SMS6ZCW10E Dishwasher
FISHER PAYKEL DD24DCTW9N Dishwasher
SIEMENS SN23EW04MG Free Standing Dishwasher
FISHER & PAYKEL DW60UNT4X2 Built-Under Dishwasher
Electrolux EEG62310L Dishwasher
Electrolux EEC67310L Dishwasher
rhima RU-50 Under Bench Dishwasher