Home > Miele > Miele PFD 104 SCVi Dishwasher

Miele PFD 104 SCVi Dishwasher

en - Installation notes  
Water connection  
Before connecting the dishwasher or immediately following disrup-  
tion in water supply the water supply pipe must be vented from air  
pockets to avoid pressure surges that may destroy components in  
the dishwasher.  
Water intake  
The quality of the incoming water must comply with the requirements  
for drinking water in the country in which the dishwasher is being op-  
erated.  
The dishwasher must be connected to the water supply in strict ac-  
cordance with current local and national water authority regulations. It  
can be connected to cold or hot water supplies. Connecting the dish-  
washer to a hot water supply will reduce program cycle times.  
For short program cycle times, a water pressure of at least 29 psi  
(200 kPa) is also required.  
If this type of shut-off valve is not available, only a qualified installer  
may connect the dishwasher to the domestic water supply.  
The shut-off valve should remain accessible once the dishwasher  
has been installed so that the water supply can be shut off whenever  
the appliance is not in use.  
Drainage  
The dishwasher drainage hose should be connected to a separate  
on-site drain for the dishwasher only. If no separate drain is available,  
we recommend connecting it to a dual-chamber siphon. When using  
a drain loop additional backflow prevention is not required.  
If the hose is to be directly connected to the drainage outlet on site,  
use the hose clip supplied with the dishwasher.  
The on-site connector for the drain hose can be used for various hose  
diameters. If the connector extends more than 1" (30 mm) into the  
drain hose, it must be shortened. Otherwise, the drain hose can be-  
come clogged.  
Lay the drain hose so that it does not kink and is not being sub-  
jected to pressure or tugged.  
If the on-site drain connection is situated lower than the guide path  
for the lower basket rollers in the open door, a siphoning effect dur-  
ing a program can cause the appliance to empty itself of water.  
In this case, lay the drain hose with a bend in it so that its highest  
point is at least level with the guide path for the lower basket rollers.  
5
 
GeneralDetails
NameMiele PFD 104 SCVi Dishwasher
MakeMiele
LanguageEnglish
FiletypePDF (Download)
File size0.63 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 102 i Dishwasher

Miele PFD 104 SCVi Dishwasher