Mueller DW-2400 Dishwasher
STEP 8
The drain hose molded end will fit 5/8" (1.6 cm), 3/4”
(1.9 cm), or 1" (2.5 cm) diameter connections on the
air gap, waste tee, or disposer. Cut on the marked line
as required for your installation.
Adjust the front feet
Adjust the back feet
IMPORTANT: Do not cut the corrugated portion of the
hose.
Cutting Lines
TIP: Pull the lower rack out about halfway. The rack
should not roll forward or back into the dishwasher. If
the rack rolls in either direction, the dishwasher must
be leveled again.
STEP 7 - OPTIONAL
You can secure the dishwasher to the cabinet with
the provided self-taping screws. Open the dishwash-
er door, tighten the 4 screws into the outer frame of
the dishwasher, and place the 4 hole-plugs on top of
the screws, as shown in the drawing below.
If a longer drain hose is required, add up to 42'' (1
meter) of length for a total of 10 ft. (3 meters) to the
factory-installed hose. Use 5/8'' (1.6 cm) or 7/8'' (2.2
cm) inside diameter hose and a coupler to connect
the two hose ends. Secure the connection with hose
clamps.
ST4"26
hole plug
Hose Clamp
Coupler
Hose Clamp
NOTE: TOTAL DRAIN HOSE LENGTH MUST NOT
EXCEED 10 FEET (3.6 METERS) FOR PROPER DRAIN
OPERATION.
10
| General | Details |
|---|---|
| Name | Mueller DW-2400 Dishwasher |
| Make | MUELLER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Mueller DW-1800 Series 18 Inch Dishwasher
Mueller DW-1800 18 in. Black Front Digital Dishwasher
BOSCH SHE41CM6N Dishwasher
BOSCH SMV4EAX23G Dishwasher
newWORLD NW60DWFSW Full Size 15 Place Dishwasher
INVENTUM VVW6040AB Building Depot Dishwasher
FISHER AND PAYKEL DD60D2NX9 Double Dishwasher
IKEA 004.756.25 DISKAD Integrated Dishwasher
BOSCH SCX6ITB00E Dishwasher
Electrolux ESF5206LOW UltimateCare 300 Dishwasher
BOSCH SMS6EDW02G Free-Standing Dishwasher
Miele G 7566 SC Dishwasher