Miele 11836720-001-02 Dishwasher

1

2

3

4

5

*INSTALLATION*  

11836720-02  

Installation  

The dishwasher may be connected to  

cold or hot water (up to max. 60 °C)  

supplies.  

If energy-saving water heating sources  

such as solar energy circulation  

systems are used, we recommend  

connecting to the hot water supply. This  

saves both time and electrical energy  

costs. Hot water is used in all  

programmes.  

The Miele Waterproof system  

Provided that your dishwasher has  

been installed correctly, the Miele  

Waterproof system will protect you from  

water damage throughout its lifetime.  

Water inlet  

 Health risk due to wash water.  

Water in the dishwasher is not  

drinking water.  

The SolarSave programme (if available)  

requires a hot water connection of  

between a minimum of 45 °C and a  

maximum of 60 °C (inlet temperature).  

The higher the water intake  

Do not drink any water from the  

dishwasher.  

 Health risk and risk of damage  

due to contaminated incoming water.  

The quality of the incoming water  

must correspond to the drinking  

water specification of the country in  

which the dishwasher is being  

operated.  

temperature, the better the cleaning and  

drying results.  

The water inlet hose is approx. 1.5 m  

long. A 1.5 m long, flexible metal  

extension hose (tested to  

14,000 kPa/140 bar) is available as an  

optional accessory from Miele specialist  

dealers or the Miele Customer Service  

Department.  

Connect the dishwasher to a drinking  

water supply.  

A stopcock with a ¾" threaded union is  

required for the connection. If a  

stopcock is not available, only a  

qualified installer may connect the  

dishwasher to the drinking water  

supply.  

The water connection pressure must be  

between 50 and 1000 kPa. If the water  

connection pressure is too high, a  

pressure reducing valve must be fitted.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Miele 11836720-001-02 Dishwasher
Make	Miele
Language	English
Filetype	PDF (Download)
File size	0.19 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Miele

Miele 11836720-001-02 Dishwasher Overview

Summary of Contents

• Page 1: Installation The dishwasher may be connected to cold or hot water supplies. If energy-saving water heating sources are used, we recommend connecting to the hot water supply. The Miele Waterproof system will protect you from water damage throughout its lifetime. Water in the dishwasher is not drinking water. The SolarSave programme requires a hot water connection of between a minimum of 45 °C and a maximum of 60 °C. The quality of the incoming water must correspond to the drinking water specification of the country. The water inlet hose is approx. 1.5 m long. Connect the dishwasher to a drinking water supply. A stopcock with a ¾ threaded union is required for the connection. The water connection pressure must be between 50 and 1000 kPa.
• Page 2: Installation Risk of damage from leaking water. Risk of damage due to excessive pressure. The connection point is subject to mains water pressure. Water leaking from it can cause damage. A brief increase in the water pressure can damage components of the dishwasher. You should therefore open the stopcock slowly and check for leaks. This dishwasher must only be operated when it is connected to a fully vented plumbing system. For the protection of drinking water, the non-return valve supplied with the dishwasher must be installed between the stopcock and the water inlet hose. Risk of electric shock from mains voltage. The inlet hose must not be shortened or damaged in any way.
• Page 3: Installation Water drainage Lay the drain hose so that it does not kink and is not being subjected to pressure or tension. The dishwasher’s drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the appliance via the drain hose. The dishwasher is supplied with approx. 1.5 m of flexible drain hose with an internal diameter of 22 mm. Leaking water can cause damage. After commissioning, make sure that the water is not leaking. The drain hose can be extended using a connection piece to attach a further length of hose. The drainage length must not be longer than 4 m and the delivery head no higher than 1 m. If the hose is to be directly fitted to the drainage outlet on site, use the hose clip supplied. The drain hose must not be shortened.
• Page 4: Installation Venting the water drain If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a programme can cause the appliance to empty itself of water. Open the dishwasher door fully. Remove the lower basket. Insert a screwdriver into the middle opening of the vent valve in the left wash cabinet wall. Press the screwdriver further into the opening and push it through the membrane behind. The vent opening for the water drain is now open.
• Page 5: Installation instructions and data plate indicate nominal power consumption and appropriate fuse rating. The dishwasher is connector-ready for connection to an earthed socket. The socket must be easily accessible after installation. Ensure a suitable means of disconnection is provided if the socket is not accessible. Consult a qualified electrician if in doubt about electrical connections. Operation on an autonomous power supply system is possible if it complies with EN 50160 or equivalent standards. Protective measures in the electrical installation must be maintained during isolated operation. Connecting the dishwasher to a multi-socket adapter or extension lead can overload the mains connection cable. The electrical installation must comply with VDE 0100 requirements. Use a type B residual current device for safety when connecting the dishwasher.