INDESIT DF9E 1B10 S UK Slimline Dishwasher

1

2

Quick Guide  

EN  

THANK YOU FOR BUYING AN INDESIT PRODUCT.  

In order to receive a more complete assistance, please register  

your appliance on: www.indesit.com/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read Safety Instructions  

guide.  

CONTROL PANEL  

1. On-Off/Reset button with indicator light  

2. Program selection knob  

3. Start/Pause button with indicator light / Drain out  

1

2

3

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device D. Introduce the  

the machine’s functional components.  

It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.  

It is important to set the water hardness.  

detergent into the dry dispenser E only. Place the amount of detergent for  

pre-washing directly inside the tub.  

Usage of detergent not designed for dishwashers may cause malfunc-  

•

•

The salt reservoir is located in the lower part of the dishwasher (see PROD- tion or damage to the appliance.  

UCT DESCRIPTION) and must be filled when the green float on the cap of  

the salt reservoir is no longer visible.  

1. Remove the lower rack and unscrew the reservoir cap  

WATER SOFTENING SYSTEM  

Water softener automatically reduces water hardness, consequently prevent-  

ing scale buildup on heater, contributing also to better cleaning efficiency.  

This system regenerates itself with salt, therefore it is required to refill  

salt container when empty.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 5 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

(anticlockwise).  

2. Only the first time you do this: fill the salt reservoir  

with water.  

3. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 1 kg); it is not unu-  

sual for a little water to leak out.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into  

the container during the wash program (this could damage the water sof-  

tener beyond repair).  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

Whenever you need to add salt, it is mandatory to complete the pro-  

cedure before the beginning of the washing cycle to avoid corrosion.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse aid dis-  

penser A should be filled when when the dark optical  

C

indicator on the dispenser door C becomes transparent.  

NEVER pour the rinse aid directly into the appliance  

tub.  

E

D

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

consumption consumption  

(litres/cycle) (kWh/cycle)  

of wash  

program  

(h:min)^*)  

Program  

Programs description  

Eco 50°- Eco program is suitable to clean normally soiled tableware, that for this use, it  

is the most efficient program in terms of its combined energy and water consumption,  

and that it is used to assess compliance with the EU Ecodesign legislation.  

1.  

4:00  

11.5  

0.78  

Intensive 65° - Program recommended for heavily soiled crockery, especially suitable  

for pans and saucepans (not to be used for delicate items).  

2.  

3.  

2:30  

2:25  

15.0  

15.0  

1.50  

1.35  

Mixed 55° - Mixed soil. For normally soiled dishes with dried food residues.  

Rapid 40’ 45° - Program to be used for half load of lightly-soiled dishes with no dried  

food residues. Does not have drying phase.  

4.  

5.  

6.  

0:40  

1:15  

0:10  

8.0  

11.0  

4.0  

0.90  

0.90  

0.01  

-

-

Half Load 50°- Ideal for washing a half load of lightly or normally soiled crockery.  

Pre-Wash - Use to refresh crockery planned to be washed later. No detergent to be used  

with this program.  

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on  

comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com  

Pre-treatment of the dishes is not needed before any of the programs.  

*) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and  

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-  

bration. The sensor calibration can increase program duration up to 20 min.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	INDESIT DF9E 1B10 S UK Slimline Dishwasher
Make	INDESIT
Language	English
Filetype	PDF (Download)
File size	1.7 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• INDESIT

INDESIT DF9E 1B10 S UK Slimline Dishwasher Overview

Summary of Contents

• Page 1: Quick Guide Thank you for buying an Indesit product. In order to receive more complete assistance, please register your appliance. Before using the appliance, carefully read the safety instructions guide. Control panel includes On-Off/Reset button, program selection knob, and Start/Pause button. The salt reservoir prevents the formation of limescale on the dishes and the machine’s functional components. It is mandatory that the salt reservoir never be empty. Water softener automatically reduces water hardness, preventing scale buildup on the heater. Rinse aid makes dish drying easier and should be filled when the indicator becomes transparent. Eco program is suitable for normally soiled tableware and is the most efficient in terms of energy and water consumption. Pre-treatment of the dishes is not needed before any of the programs.
• Page 2: Quick Guide Please scan the QR code on your product in order to have more detailed information. Options and functions Drain Out - To stop and cancel the active cycle, the Drain Out function can be used. Capacity: 9 standard place-settings Loading the racks Upper rack - Foldable flaps with adjustable position. Lower rack - The cutlery basket should be positioned only at the front of the lower rack. Cleaning and maintenance Cleaning the filter assembly. Cleaning the spray arms. Troubleshooting No water in the water supply or the tap is closed. The dishwasher does not fill the water. Dishwasher finishes the cycle prematurely. Policies, standard documentation, ordering of spare parts and additional product information can be found by using the QR code on your product.