PHILCO PD 1045 EA Dishwasher
Water inlet hose
Do not use the water inlet hose of your old machine,if any. Use the new water
inlet hose supplied with your machine instead. If you are going to connect a
new or long - unused water inlet hose to your machine ,run water through it
for a while before making the connection. Connect the water inlet hose
directly to the water inlet tap. The pressure supplied by the tap should be at a
minimum of 0.03 Mpa and and at a maximum of 1 Mpa.If the water pressure is
above 1 Mpa,a pressure-relief valve should be fitted inbetween.
After the connections are made, the tap should be turned on fully and checked for water tightness. For the
safety of your machine, make sure to always turn off the water inlet tap after each wash programme is finished.
NOTE: Aquastop water spout is used in some models. In case of using
Aquastop, a dangerous tension exists.
Do not cut Aquastop water spout. Do not let it get folded or twisted.
Note printing on the water inlet hose!
If models are marked with 25°, the water temperature may be max. 25 °C (cold water).
Forall other models:
Cold water preferred; hot water max. temperature 60 °C.
EN - 7
Copyright © 2020, Fast ČR, a. s.
Revision 10/2022
| General | Details |
|---|---|
| Name | PHILCO PD 1045 EA Dishwasher |
| Make | PHILCO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.48 MB |
(1 votes, average: 5.00 out of 5)
Loading...
PHILCO PD 1466 CBIT Dishwasher
BOSCH SMS2ITI12E Dishwasher
FISHER PAYKEL DW60U4HI2 Built Under Dishwasher
ASKO DSD746U Dishwasher
FOTILE BD2B-G2-Y Matte Glass Dishwasher
BOSCH SMS4EKI06E-30 Dishwasher
BOSCH SMS6ZCI37Q Dishwasher
FISHER AND PAYKEL DW60UC6B Built Under Dishwasher
BOSCH SMV4ENX06E Dishwasher
Haier HDW15F3S1 Dishwasher
epoq EDW45B42W23 45cm Dishwasher