SIEMENS SMS6HAW00X Dishwasher
en
Before using for the first time, read the operating instructions.
Setting up Home Connect
Overview of water hardness settings
Setting the water softening sys-
tem
Programmes
You can find an overview of the
water hardness values that can
be selected here.
A table of country-specific units
can be found in the instruction
manual.
The programme data has been meas-
ured in the laboratory according to
European standard EN 60436.
The consumption figures depend on
the programme and additional func-
tion selected.
The runtime will change if the rinse
aid system is switched off or rinse aid
needs to be added.
Medium
Medium
Medium
Hard
Hard
Hard
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
H:02
H:03
H:04
H:05
H:06
H:07
Tip: Connect your appliance to a mobile device. You can con-
veniently change all settings via the Home Connect app.
1. Press
.
2. To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
1. Install the Home Connect app on your mo-
bile device and follow the instructions.
a The display shows
.
3. Press
or repeatedly until the
Hardness mmol/l
range
Setting
value
right water hardness has been set.
4. To save the settings, press
for 3 seconds.
2. Scan the QR code using the Home Con-
nect app.
Soft
Soft
0 - 1.1
1.2 - 1.4
H:00
H:01
Programme
1) Duration [h:min]
2) Energy [kWh]
3) Water [l]
1) 1:50 - 2:05
2) 0,750 - 0,900
3) 11,2 - 13,7
1) 2:00 - 3:00
2) 0,920 - 1,420
3) 7,5 - 15,2
1) 2:20 - 2:45
2) 1,250 - 1,450
3) 10,6 - 13,4
1) 2:30
Auto 35-45°C
Auto 45-65°
Auto 65-75°
Super 60°
Eco 50°
Adding special salt
To avoid damage to the appliance, only add special
salt to the dispenser for special salt just before the
programme starts.
1. Unscrew the lid of the dispenser for special salt
and remove.
2. On initial start-up: Fill the dispenser right up with
water.
3. Add the special salt to the
dispenser. The water in the
dispenser is displaced and
forced out. Never add de-
tergent.
2) 1,400
3) 12,5
1) 3:00
4. Place the lid back on the dispenser and turn to
close.
2) 0,980
3) 9,5
1) 2:00 - 2:05
2) 0,800 - 0,850
3) 11,1 - 13,8
1) 0:45 1
Glass 40°
Adding rinse aid
1. Press the catch on the lid
2. Add rinse aid up to the
max mark.
2) 0,650
of the dispenser for rinse
Express 45°
3) 10,2
aid
and lift
.
1) 0:15 - 0:15
2) 0,050 - 0,050
3) 4,0 - 4,0
Favourite
1
half standard load
3. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
Adding detergent
1. Add the detergent to the
dry detergent dispenser.
2. Close the lid of the deter-
gent dispenser.
a The lid clicks into position.
How to use your appliance
1. Load the tableware.
tate freely.
2. Add detergent.
3. Switch on the appliance
4. Select the programme.
5. Start the programme
6. Remove the tableware at the end of the pro-
gramme.
7. To cancel the programme, press
for
Only clean tableware that is suitable for dish-
washers. Remove large remnants of food from
the tableware. Check that the spray arms can ro-
approx. 4 seconds.
.
The programme is cancelled and ends after ap-
prox. 1 minute.
.
| General | Details |
|---|---|
| Name | SIEMENS SMS6HAW00X Dishwasher |
| Make | SIEMENS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |

SIEMENS SN73HX15VE Dishwasher

SIEMENS SN85TX00CE Dishwasher

SIEMENS iQ500 Dishwasher

SIEMENS SR93EX24MG Dishwasher

SIEMENS SN95Z802CE Dishwasher

SIEMENS SN55HS01MI Dishwasher

SIEMENS SN13EW78CS Dishwasher

SIEMENS SN15ZS80CS Dishwasher

SIEMENS SN67ZX86DM Dishwasher

SIEMENS SN13ES79CS Undercounter Dishwasher

SIEMENS SMS6HAW00X Dishwasher Overview
Summary of Contents
- Page 1: Before using for the first time, read the operating instructions. Setting up Home Connect. Overview of water hardness settings. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Add the detergent to the dry detergent dispenser. Load the tableware. Only clean tableware that is suitable for dishwashers. To cancel the programme, press for approx. 4 seconds.
- Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and scoop out any water. Clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages. Insert the lower spray arm and the upper spray arm. Clean wastewater pump Disconnect the appliance from the power supply. Remove any remnants of food and foreign bodies in the area of the impeller. Troubleshooting E:32-00 will light up alternately or indicator for water supply lights up. Supply hose is kinked or water tap is turned off. E:92-40 will light up alternately; filters are soiled or blocked. Rust spots on cutlery may occur if cutlery is not sufficiently rust-resistant. Arrange tableware with sufficient space in between to avoid blockages. Detergent residue may be present if the detergent dispenser is blocked. Check that the spray arms are not blocked and can rotate freely. Select a more intensive washing programme if the current one is too weak.














