Home > RANGEmaster > RANGEMASTER RDWT6012-I1E Integrated Dishwasher
RANGEMASTER RDWT6012-I1E Integrated Dishwasher
DocNo.800-0401 - Troubleshooting - RDW6012 dishwasher
6. Troubleshooting
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Plug your Dishwasher in.
Your Dishwasher is not plugged in.
Your Dishwasher is not switched on.
Fuse blown.
Switch your Dishwasher on by pressing the On/Off button.
Check your indoor fuses.
The programme does not start.
Water inlet tap is closed.
Turn on the water inlet tap.
Your Dishwasher door is open.
Close the Dishwasher door.
Check the water inlet hose and machine filters and make
sure they are not clogged.
Water inlet hose and machine filters are clogged.
Water drain hose is clogged or twisted.
The filters are clogged.
Check the drain hose, then either clean or untwist it.
Clean the filters.
Water remains inside the
machine.
The programme is not finished yet.
Power failure.
Wait until the programme is finished.
Check mains power.
Machine stops during washing.
Water inlet failure.
Check water tap.
Shaking and hitting noises are
heard during a wash operation.
The spray arm is hitting the dishes in the lower basket.
Move or remove items blocking the spray arm.
Do not overload baskets.
Dishes placed incorrectly, sprayed water not reaching
affected dishes.
Place dishes as instructed in the section on loading your
dishwasher.
Dishes leaning on each another.
Not enough detergent used.
Use the correct amount of detergent, as instructed in the
programme table.
Partial food wastes remain on the
dishes.
Use the information in the programme table to select the
most appropriate programme.
Wrong wash programme selected.
Spray arms clogged with food waste.
Clean the holes in the spray arms with thin objects.
Check the drain hose and filters are correctly fitted.
Filters or water drain pump clogged or filter misplaced.
Use the correct amount of detergent, as instructed in the
programme table.
Not enough detergent used.
Rinse aid dosage and/or water softener setting set too
low.
Increase rinse aid and/or water softener level.
Whitish stains remains on dishes.
High water hardness level.
Salt compartment cap not closed properly.
Drying option is not selected.
Increase water softerner level and add salt.
Check that the salt compartment cap is closed properly.
Select a programme with a drying option.
Increase rinse aid dosage setting.
Dishes do not dry.
Rinse aid dosage set too low.
Stainless-steel quality of the dishes is insufficient.
Use only dishwasher-proof sets.
Adjust the water hardness level using water hardness
table.
High level of salt in wash water.
Rust stains form on the dishes.
Salt compartment cap not closed properly.
Check that the salt compartment cap is closed properly.
Too much salt spilled in the Dishwasher while filling it with Use funnel while filling salt to the compartment to avoid
salt.
spillage.
A poor mains grounding.
Consult a qualified electrician immediately.
Detergent remains in the
detergent compartment.
Detergent was added when the detergent compartment
was wet.
Make sure detergent compartment is dry before use.
14
| General | Details |
|---|---|
| Name | RANGEMASTER RDWT6012-I1E Integrated Dishwasher |
| Make | RANGEmaster |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.01 MB |
(1 votes, average: 5.00 out of 5)
Loading...
RANGEMASTER RDWP6015-I54 Integrated Dishwasher
Monsher MD 6001 Dishwasher
BOSCH SPI2HKS42E Dishwasher
BOSCH SMV4ECX10E-38 Dishwasher
VIKING VDWU724SS Dishwasher
Whirlpool W8I HP42 L MaxiSpace Dishwasher
SHARP SDW6888JS Slide in Smart Dishwasher
Kaiser S 60 I 69 XL Empire Dishwasher
Bauknecht Dishwasher
BOSCH SMD8TC800E Dishwasher
BOSCH SMV4HBX19E Dishwasher