Home > RANGEmaster > RANGEMASTER RDWT6012-I1E Integrated Dishwasher
RANGEMASTER RDWT6012-I1E Integrated Dishwasher
2. Before Using Your Appliance
Preparing your Dishwasher for first use
Test Strip
•
Make sure the electricity and supply water specifications
match the values indicated in the installation
instructions for the machine.
Set the
hardness
level
Run water
through
the tap
Keep the
strip in the
water (1sec)
Shake the
strip.
Wait
(1min.)
of your
machine.
(1min.)
•
•
•
Remove all packaging material inside the machine.
Set the water softener level.
1
2
3
4
5
6
Fill the rinse aid compartment.
Fill the salt (IF AVAILABLE)
To add softener salt, open the salt compartment cap by
turning it counter clockwise. (1) (2) At first use, fill the
compartment with 1 kg salt and water (3) until it is almost
overflowing. If available, using a funnel (4) will make filling
easier. Replace the cap and close it. After every 20-30 Cycles
add salt into your machine until it fills up (approx. 1 kg).
1
2
NOTE: The level is set to 3 as default. If the water is well water
or has a hardness level above 90 dF, we recommend that you
use filter and refinement devices.
Water Hardness Table
German
dH
French
dF
British
dE
Level
Indicator
3
4
1
2
3
4
5
6
0-5
0-9
0-6
L1 is shown on the display.
L2 is shown on the display.
L3 is shown on the display.
L4 is shown on the display.
L5 is shown on the display.
L6 is shown on the display.
6-11
10-20
21-30
31-40
41-55
56-90
7-14
12-17
18-22
23-31
32-50
15-21
22-28
29-39
40-63
Only add water to the salt compartment on first use.
Use softener salt specifically produced for use in dishwashers.
Water Softener System
When you start your dishwasher, the salt compartment is
filled with water, therefore put the softener salt in prior to
starting your machine.
The dishwasher is equipped with a water softener which
reduces the hardness in the mains water supply. To find out
the hardness level of your tap water, contact your water
company or use a test strip (if available).
If the softener salt has overflowed and you do not start
the machine immediately, run a short washing program to
protect your machine against corrosion.
Setting
Push the programme button and hold it down.
Turn on the machine.
Hold down the programme button until “SL”disappears.
The machine will display the last setting.
Set the level by pushing the programme button.
Switch off the machine to save the setting.
4
| General | Details |
|---|---|
| Name | RANGEMASTER RDWT6012-I1E Integrated Dishwasher |
| Make | RANGEmaster |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.01 MB |
(1 votes, average: 5.00 out of 5)
Loading...
RANGEMASTER RDWP6015-I54 Integrated Dishwasher
Whirlpool 2B19 Dishwasher
FISHER PAYKEL DD24SCTB9N Dishwasher
MAYTAG PDBTT49AWW Dishwasher
BOSCH SMS4HCI60E Dishwasher
Miele G 7765 SCVi XXL Auto Dos Obsidian Dishwasher
FISHER AND PAYKEL DD60ST4HNX9 Contemporary Tall Dishwasher
BOSCH SMS6ECC00E Dishwasher
beko DUT25401W Electrical Household Dishwasher
IKEA SODERBODA Integrated Dishwasher
gorenje GV673B60 TotalDry Dishwasher