Home > RANGEmaster > RANGEMASTER RDWT6012-I1E Integrated Dishwasher

RANGEMASTER RDWT6012-I1E Integrated Dishwasher

Cleaning  
Fig. 5.5  
Drain Pump  
Large food residues or foreign objects which were not  
captured by the filters may block the waste water pump. The  
rinsing water will then be above the filter.  
Warning Risk of cuts!  
n
When cleaning the waste water pump, ensure that you do  
not injure yourself on pieces of broken glass or pointed  
implements.  
1. First, always disconnect the appliance, from the power  
supply.  
2. Take out baskets.  
3. Remove the filters.  
4. Scoop out water, use a sponge if required.  
5. Check the area and remove any foreign objects.  
6. Install filters.  
7. Re-insert baskets.  
Spray arms (Fig. 5.5)  
Make sure that the spray holes are not clogged and that no  
food waste is stuck to the spray arms. If there is any clogging,  
remove the spray arms and clean them under water.  
To remove the upper spray arm undo the nut holding it in  
position, by turning it clockwise, and pulling it downwards.  
Make sure that the nut is properly tightened when refitting  
the upper spray arm.  
13  
GeneralDetails
NameRANGEMASTER RDWT6012-I1E Integrated Dishwasher
MakeRANGEmaster
LanguageEnglish
FiletypePDF (Download)
File size1.01 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
RANGEMASTER RDWP6015-I54 Integrated Dishwasher
RANGEMASTER RDWP6015-I54 Integrated Dishwasher

RANGEMASTER RDWT6012-I1E Integrated Dishwasher