Home > RANGEmaster > RANGEMASTER RDWT6012-I1E Integrated Dishwasher
RANGEMASTER RDWT6012-I1E Integrated Dishwasher
Cancelling a Programme
Power Save Mode
Follow the steps below to cancel a programme while in
operation.
To activate or deactivate power save mode, follow the below
steps:
1. Open the door of the machine, the selected programme
will be shown on the display.
1. Open the door and press the Delay (4) and Half Load (5)
buttons simultaneously for 3 seconds.
2. Press and hold the Programme selection button (2) for
3 seconds. At the end of 3 seconds, ‘1’will show on the
Display (3).
2. After 3 seconds, the machine will display last Setting,
“IL1”or “IL0”.
3. When Power Save Mode is activated, “IL1”will be
displayed. On this mode, interior lights will turn off 4
minutes after the door is opened, and the machine will
turn off after 15 minutes of no activity in order to save
energy.
3. The water discharge process will start after the door of
the machine is closed and will continue for 30 seconds.
When the programme is cancelled, a buzzer will sound
5 times.
4. When Power Save Mode is deactivated “IL0”will be
displayed. If Power Save Mode is deactive, interior lights
will be on as long as the door is open, and the machine
will always be on unless it is turned off by user.
Switching the Machine Off
“00”will be shown on the display when the selected wash
programme is complete, a buzzer will also sound 5 times. You
can then switch your machine off using the Power On/Off
button (1).
5. To save the selected setting, turn off the machine.
In factory setting, Power Save Mode is active.
Info. LED (Model Dependent)
NOTE: Do not open the door before a programme is
complete.
NOTE: If the door of the machine is opened or the power is
cut during operation, the programme will continue when the
door is closed or the power returns.
LED Indicator
Red, continuous
Red, flashing
State of the Machine
The machine is running a
program.
NOTE: If the power is cut or the machine door is opened
during the drying process, the programme will terminate.
Your machine will now be ready for a new programme
selection.
A program is cancelled.
The machine has a fault. Refer
to section “Automatic fault
warnings and what to do”.
Red, flashing rapidly
Green, continuous
Buzzer Sound Control
Program has finished.
To change the buzzer sound level, follow the below steps:
1. Open the door and press the Programme (2) and Delay
(4) buttons simultaneously for 3 seconds.
2. When the sound setting is recognised, the buzzer gives
a long sound and the machine will display the last set
level, from “S0” to “S3”.
3. To decrease the sound level press the Programme
button (2). To increase the sound level, press the Delay
button (4).
4. To save the selected sound level, turn off the machine.
’’S0’’level means all voices are off. Factory setting is “S3”.
11
| General | Details |
|---|---|
| Name | RANGEMASTER RDWT6012-I1E Integrated Dishwasher |
| Make | RANGEmaster |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.01 MB |
(1 votes, average: 5.00 out of 5)
Loading...
RANGEMASTER RDWP6015-I54 Integrated Dishwasher
Miele 12496690 Full Size Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
JENNAIR W11680101 Dishwasher
FISHER AND PAYKEL DD60STI9 Tall Dishwasher
SIEMENS SR73HX76ME Dishwasher
kleenmaid DW6032 Semi Integrated Dishwasher
Hisense HS622E90BUK Dishwasher
FISHER PAYKEL DD24STX6PX1 Tall Sanitize Dishwasher
BOSCH SMV4ECX21E-38 Dishwasher
SHARP SDW6757ES Dishwasher