Home > Samsung > SAMSUNG DW90F89 Dishwasher

SAMSUNG DW90F89 Dishwasher

Testing the dishwasher  
1. Open the door and remove all foam, paper packaging, and unnecessary parts.  
2. Turn on the circuit breaker and open the water supply valve.  
3. Turn on the dishwasher and run the Smart Install Cycle.  
a. Tap Settings, and select Delay Start.  
b. Tap and to set the time to "17".  
c. Touch and hold the Start until "AS" appears on the display.  
d. Tap Start and close the door.  
e. The Smart Install Cycle will start and run for about 7 minutes. Then the dishwasher doorwill open  
and flash the number "5" for about 1 minute.  
f. Once the Smart Install Cycle is completed, "Ot" will appear on the display.  
CAUTION  
Ensure there is no water leakage at both ends of the water supply line and drain hose connector.  
4. If there is no problem, turn off the dishwasher.  
-
If you detect a leak, refer to the Managing the water leakage section.  
English29  
Untitled-11 29  
2024-12-09 4:27:38  
GeneralDetails
NameSAMSUNG DW90F89 Dishwasher
MakeSamsung
LanguageEnglish
FiletypePDF (Download)
File size4 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
SAMSUNG DW80N3030UW Front Dishwasher
SAMSUNG DW80N3030UW Front Dishwasher
SAMSUNG DW80BB70 Dishwasher
SAMSUNG DW80BB70 Dishwasher
SAMSUNG DW50T6060U Dishwasher
SAMSUNG DW50T6060U Dishwasher
SAMSUNG DW80BB70 Series Dishwasher
SAMSUNG DW80BB70 Series Dishwasher
SAMSUNG DW80CB5450 Dishwasher
SAMSUNG DW80CB5450 Dishwasher
Samsung DW60M5062 Dishwasher
Samsung DW60M5062 Dishwasher
Samsung DW60 7 Series Dishwasher
Samsung DW60 7 Series Dishwasher
SAMSUNG DW9000F Dishwasher
SAMSUNG DW9000F Dishwasher
SAMSUNG DW60R2014 Wide 12 Place Dishwasher
SAMSUNG DW60R2014 Wide 12 Place Dishwasher
SAMSUNG DW60H9950FW-SA Dishwasher
SAMSUNG DW60H9950FW-SA Dishwasher

SAMSUNG DW90F89 Dishwasher