seasons 224FPC2MAWB Dishwasher
SOLUTIONS TO COMMON DISHWASHING PROBLEMS
Solution
Problem
Possible cause
Door may not be closed properly
ly
Shut the door complete make sure it is latched
Power supply or power line is not connected
Check and connect the power supply
Dishwasher won’t start
Delay Start option has been selected
Refer
in this manual to rese
Deactivate the child lock,refer to child lock
section in this manual
Child Lock activated(selected models)
Dishwasher beeps at the
end of the cycle
It indicates the wash cycle finished, the
dishwasher will beep
The rinse aid level is low
Rinse Aid light on
Add rinse aid
Check the dishwasher,make sure it connected
to the hot water supply
The dishwasher is connected to cold water
When heavy soil is detected,the auto,normal,
pots&pan cycle will automatically increase the
cycle time
Dishwasher operates too
long
The cycle time will vary due to the soil
The sanitize option is selected
When sanitize option is selected,the cycle time
will be increase to meet the sanitized
temperature request
Use you dishwasher when the water pressure is
normal
Water pressure is temporarily low
Make sure the dishwasher is connected to the
hot water supply
The inlet water is low
Try not use your dishwasher when hot water is
being used elsewhere in the house
Dishes are not clean
enough
Load the dishes again as the manual introduced
Dishes are loaded too close together
improper use of detergent
Add detergent depending on the water hardness
and the cycle you chose.Use fresh deter ent.
The selected cycle is not suitable for food soil condition
Spay arms is blocked by some items
y
Choose anther c cle for lon er washin time
g
g
Make sure the spay arm is rotated fluently
Fill rinse aid dispenser or increase the amount
Detergent dispenser is empty
of rinse aid.
Dishes not drying enough
Improper loading of dishes
Load the dishes again as the manual introduction
The cycle you chose did not included the drying.
Choose the proper cycle with drying
For extremely hard water install a water softener
Load the dishes again as the manual indicates
Use fresh rinse aid
Water hardness is too
high
Improper loading of dishes
Spots and filming on
dishes
Old or damp powder rinse aid is used
Rinse dispenser empty
Add rinse aid to the dispenser
Using too much detergent
Use less detergent if you have soft water
Lower the inlet water temperature
Etching
The inlet water temperature exceeds 150
Detergent may be too old
ꢀ
Use fresh detergent
Detergent left in
dispenser cup
Load the dishes,making sure the spray arms
arenot blocked
Spray arm is blocked
.
14
| General | Details |
|---|---|
| Name | seasons 224FPC2MAWB Dishwasher |
| Make | seasons |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.52 MB |
(1 votes, average: 5.00 out of 5)
Loading...
seasons SDW2FCMW Front Dishwasher
seasons SDW2FCMB Front Dishwasher
FISHER AND PAYKEL DD60D4NB9 Dishwasher
BOSCH SMS4IMI62T Dishwasher
FISHER PAYKEL DD60D4ZB9 Double Dishwasher
FISHER PAYKEL DD60SCTX9 Dishwasher
FOTILE BD2B-G5 Dishwasher
BOSCH SMS46NI10M Dishwasher
BOSCH SMS26AI08G Dishwasher
BOSCH SPH4EKX24E Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
BOSCH SMS45NI00Z Dishwasher