seasons SDW2FCMW Front Dishwasher
2
If a longer drain hose is required, you can add up to 42" (1.1 m) of length, for a total of 10 ft. (3.01 m) to the factory
installed hose. Use 5/8”or 7/8”inside diameter hose and a coupler to connect the two hose ends. Secure the
connection with screw-type hose clamps.
IMPORTANT: For proper drain operation, the total drain hose length must not exceed 10 ft. (3.01 m).
Screw-type hose clamp
Coupler
Screw-type hose clamp
3
Secure the drain hose to the air gap, waste tee, or garbage disposal with a screw-type clamp, using the appropriate
method below. See “Drain preparation on page 6” on page 6, if you do not know which method to to use.
Method 1 - Air gap to a waste tee or garbage disposal.
Airgap
Airgap
Waste tee installation
Garbage disposal installation
Method 2 - High drain loop to a waste tee or garbage disposal
Fasten to the underside
of the countertop
Fasten to the underside of
the countertop
32 in. (81.28 cm) min.
18 in. (45.72 cm) min.
32 in. (81.28 cm) min.
18 in. (45.72 cm) min.
Garbage disposal installation
Waste tee installation
20
| General | Details |
|---|---|
| Name | seasons SDW2FCMW Front Dishwasher |
| Make | seasons |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.82 MB |
seasons 224FPC2MAWB Dishwasher

seasons SDW2FCMB Front Dishwasher



































