Home > seasons > seasons SDW2FCMW Front Dishwasher

seasons SDW2FCMW Front Dishwasher

Step 3: Remove the toekick  
Remove the two toekick screws with a Phillips screwdriver, then remove the toekick.  
You’ll need:  
Adjustable wrench  
Phillips screwdriver  
Step 4: Install to power  
Turn off the electricity to the dishwashers electrical circuit.  
Make sure that the electrical power is turned off at the source.  
Warning:  
If your house wiring is not 2-wire with a ground, a ground must be provided by the installer.  
If your house wiring is aluminum, be sure to use cUL/UL Listed anti-oxidant compound and aluminum-to-copper  
connectors.  
Power cord  
1
2
3
4
5
6
Remove the junction box cover on the front right of the dishwasher.  
Make sure that the junction box’s electrical wires are pulled inside of the junction box.  
Remove the lock nut from the strain relief, then push the strain relief into the round opening of the junction box.  
Install the lock nut on the strain relief from inside the junction box.  
Insert the ends of the power cord’s electrical wires into the junction box through the strain relief.  
Connect the incoming white (or ribbed) wire to the dishwasher’s white wire, the black (or smooth) wire to the  
dishwasher’s black wire, and the ground wire to the dishwasher’s green wire. Use cUL/UL listed wire nuts of the  
appropriate size.  
7
Tighten the strain relief screws and lock nut to stabilize the power cord’s electrical wires, then make sure that all of the  
connections are secure.  
11  
GeneralDetails
Nameseasons SDW2FCMW Front Dishwasher
Makeseasons
LanguageEnglish
FiletypePDF (Download)
File size1.82 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
seasons 224FPC2MAWB Dishwasher
seasons 224FPC2MAWB Dishwasher
seasons SDW2FCMB Front Dishwasher
seasons SDW2FCMB Front Dishwasher

seasons SDW2FCMW Front Dishwasher