SOLT GGSDW6013W Dishwasher
Troubleshooting continued
Error Codes
If there is a malfunction, the dishwasher will display error codes to identify these:
Problem
Possible Causes
What To Do
• tems of crockery are loose in the
dishwasher.
• Interrupt the program and rearrange the items
of crockery.
Rattling noise in
the dishwasher
Codes
Meanings
Possible Causes
The Rapid
indicator
flashes
Longer inlet time.
Faucets is not opened, or water intake is
restricted,
• This may be caused by on-site
installation or the cross-section of
the piping
• This has no influence on the dishwasher
function.
Knocking noise
in the water
pipes
or water pressure is too low.
If in doubt, contact our After Sales Support on:
1300 11 4357
frequently
• The dishes were not loaded correctly • Refer to the “Preparing and Loading Dishes”
section of this manual
The dishes are
not clean
The 90 minutes Not reaching required temperature. Malfunction of heating element.
• The program was not powerful
enough
• Select a more intensive program
and Rapid
indicator
flashes
• Use more detergent, or change your detergent.
• Not enough detergent was
dispensed
• Rearrange the items so that the spray can
rotate freely.
frequently
• Items are blocking the movement of
the spray arms
• Clean and/or fit the filter correctly.
Clean the spray arm jets.
The Glass
indicator
Overflow.
Some element of dishwasher leaks.
• The filter combination is not clean or
is not correctly fitted in the base of
wash cabinet.
flashes
This may cause the spray arm jets to
get blocked.
frequently
• Combination of soft water and too
much detergent
• Use less detergent if you have soft water and
select a shorter cycle to wash the glassware
and to get them clean.
Cloudiness on
glassware
The ECO, Glass Failure of communication between
Open circuit or a break in wiring.
and Rapid
indicator
flashes
main circuit board with display
circuit board.
• Aluminium utensils have rubbed
against dishes
• Use a mild abrasive cleaner to eliminate those
marks.
Black or grey
marks on dishes
frequently
• Dishes block detergent dispenser
• Re-load the dishes properly.
Detergent left in
dispenser
Warning
•
•
If overflow occurs, turn off the main water supply before calling a service
• Improper loading
• Too little rinse-aid
• Load the dishwasher as suggested in this
manual.
The dishes
aren’t drying
If there is water in the base pan because of an overfill or small leak, the water should be removed
before restarting the dishwasher
• Increase the amount of rinse-aid/refill the
rinse-aid dispenser
•
If there is an error code that cannot be solved, please request professional assistance
• Dishes are removed too soon
• Do not empty your dishwasher immediately
after washing. Open the door slightly so that
the steam can come out. Take out the dishes
until the inside temperature is safe to touch.
Unload the lower basket first to prevent the
dropping water from the upper basket.
• Wrong program has been selected.
• With a short program, the washing
temperature is lower, decreasing cleaning
performance.
• Use of cutlery with a low-quality
coating.
Choose a program with a long washing time.
• Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for washing in the dishwasher.
20
21
| General | Details |
|---|---|
| Name | SOLT GGSDW6013W Dishwasher |
| Make | SOLT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.74 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SOLT GGSDW6012B Dishwasher
BOSCH SGV4HCX48E Dishwasher
Miele PTD 901 Through Feed Dishwasher
BOSCH SMT6ECX00E Dishwasher
BOSCH SMV4EAX23G Dishwasher
beko BDFS26046XQ Dishwasher
IKEA SBE6496E0G PROFFSIG Integrated Dishwasher
BOSCH SMV4HTX33E Dishwasher
INVENTUM VVW6040AB Building Depot Dishwasher
JENNAIR W11680101 Dishwasher
FISHER PAYKEL DD24STI9 N Tall Dishwasher