Home > Toshiba > TOSHIBA DW-08T1 Place Setting Dishwasher

TOSHIBA DW-08T1 Place Setting Dishwasher

If there is no grounding in your place, the power  
cord with air switch will make a protection. When  
users touch the shell with electricity of the  
appliance, it will cut the power immediately to  
protect from constant electric shock.  
When power supply safely, the indicator(A) lights  
up. If the electric shock happens, the switch(B) will  
eject. After the problem has been solved, please  
press the switch(B) to reset.  
A
B
For your safty and proper operation of the  
appliance, make sure the appliance is grounded.  
Water connection  
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that  
it is fastened tightly in place.  
If the water pipes are new or have not been used for an extended period of time, let the  
water run to make sure that the water is clear. This precaution is needed to avoid the risk of  
the water inlet to be blocked and damage the appliance.  
Connection of drain hoses  
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into  
the sink, making sure to avoid bending or crimping it. The height of drain pipe must be less  
than 750 mm. The free end of the hose must not be immersed in water to avoid the back  
flow of it.  
Please securely fix the drain hose in either position A or position B  
Counter  
A
Back of dishwasher  
Drain hose  
B
Water Inlet  
Drain Pipe  
Mains Cable  
29  
GeneralDetails
NameTOSHIBA DW-08T1 Place Setting Dishwasher
MakeToshiba
LanguageEnglish
FiletypePDF (Download)
File size1.22 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
TOSHIBA DW-15F5SS-AU Dishwasher
TOSHIBA DW-15F5SS-AU Dishwasher
TOSHIBA DWS-22AMY(K) Dishwasher
TOSHIBA DWS-22AMY(K) Dishwasher

TOSHIBA DW-08T1 Place Setting Dishwasher