UGP-24CR Classic Retro By Unique Dishwasher
INSTALLING THE DISHWASHER Cont'd
Direct wiring
1 Remove the junction box cover from the power supply junction box on the wall.
Ground to green
White to white
Black to black
Junction Box
Insert wires through strain relief fitting and tighten
2 Locate the three dishwasher wires, (white, black, and green) with stripped ends, then insert
the dishwasher wires through the small hole in the junction box.
3 Secure the house wiring to the bottom of the junction box with a strain relief fitting.
4 Use wire nuts to connect incoming ground to green, white to white, and black to black.
5 Replace the junction box cover. Make sure that no wires are pinched under the cover.
You'll need:
Three wire nuts
(UL listed)
Strain relief (for
electrical connections)
Phillips screwdriver
13
| General | Details |
|---|---|
| Name | UGP-24CR Classic Retro By Unique Dishwasher |
| Make | UNIQUE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.96 MB |
(1 votes, average: 5.00 out of 5)
Loading...
UNIQUE Classic Retro Dishwasher
ASKO DFI8557MMXXL Dishwasher
KLEENmaid DW6031 Dishwasher
BOSCH SHE3AEM5N Dishwasher
FISHER PAYKEL DD60ST4NX9 Single Dishwasher
FISHER AND PAYKEL DD24DI9N Dishwasher
LG LDF5545SS Dishwasher
BOSCH SMS6ZDW48E Dishwasher
INDeSIT D2F Dishwasher
Kuppersberg GSM 6074 Dishwasher
FISHER PAYKEL DW60UC2X2 Built-Under Dishwasher