UGP-24CR Classic Retro By Unique Dishwasher
INSTALLING THE DISHWASHER Cont'd
Step 8: Install the drain hose
1 Insert the drain hose into the hole in the cabinet wall. If a power cord is used, guide the end
through a separate hole.
Tip: Position the water line and house wiring on the floor to avoid interfering with the base of the dishwasher.
Maximum drain hose
length 10ft. (3.01m)
Water
line
Drain hose
House wiring
Insulation blanket
Step 9: Slide the dishwasher partially into the cabinet
Caution: Do not push against the front panel with your knees. Damage will occur.
1 Position the dishwasher in front of the opening, then slide the dishwasher into the opening a
few inches at a time.
2 Pull the drain hose through the opening under the sink as you proceed. Stop when the
dishwasher is a few inches in front of the adjacent cabinetry.
3 Make sure that the drain hose is not kinked under the dishwasher and that there is no
interference with the water line, wiring, or any other component.
Do not push against the front
door panel with your knees.
You will damage the front
panel.
17
| General | Details |
|---|---|
| Name | UGP-24CR Classic Retro By Unique Dishwasher |
| Make | UNIQUE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.96 MB |
(1 votes, average: 5.00 out of 5)
Loading...
UNIQUE Classic Retro Dishwasher
FISHER PAYKEL DOOR DD60ST Door Panel Integrated Tall Single DishDrawer Dishwasher
BOSCH SRV2HKX39G Dishwasher
FISHER PAYKEL DD24DCTW9 N
Whirlpool WRF540CWHZ Dishwasher
BOSCH SMV4ENX06E Dishwasher
SIEMENS SN63HX60CE Dishwasher
kleenmaid DW6032 Semi Integrated Dishwasher
beko BDFS26046XQ Dishwasher
JENNAIR W11680101 Dishwasher
BOSCH SMS4IKC62T Dishwasher