Home > Zanussi > ZANUSSI ZSFN121W3 Slimline Dishwasher

ZANUSSI ZSFN121W3 Slimline Dishwasher

Water  
(l)  
Energy  
(kWh)  
Duration  
(min)  
Programme 1)2)  
3.6  
0.015  
15  
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-  
tity of dishes and the degree of soil can change the values.  
2) The values for programmes other than ECO are indicative only.  
INFORMATION FOR TEST INSTITUTES  
To receive the necessary information for conducting performance tests (e.g. according to: BS EN60436 ),  
send an email to:  
In your request, include the product number code (PNC) from the rating plate.  
For any other questions regarding your dishwasher, refer to the service book provided with your appliance.  
SETTINGS  
PROGRAMME SELECTION MODE AND  
USER MODE  
After activation, the appliance is in programme  
selection mode by default. If not, set the  
programme selection mode the following way:  
When the appliance is in programme selection  
mode, you can set a programme and enter user  
mode.  
Press and hold  
until the appliance is in  
programme selection mode.  
Settings available in the user mode:  
The level of water softener according to the  
water hardness.  
Activation or deactivation of the rinse aid empty  
notification.  
The level of rinse aid according to the required  
dosage.  
Activation or deactivation of the AirDry.  
THE WATER SOFTENER  
The water softener removes minerals from the water  
supply, which would have a negative effect on the  
washing results and on the appliance.  
The higher the content of these minerals, the harder  
your water is. Water hardness is measured in  
equivalent scales.  
The saved settings remain valid until you  
change them again.  
The water softener should be adjusted according to  
the hardness of the water in your area. Your local  
water authority can advise you on the hardness of  
the water in your area. Set the right level of the  
water softener to assure good washing results.  
How to set the programme selection mode  
The appliance is in programme selection mode  
when the on/off indicator is on and  
flashes.  
indicator  
Water hardness  
German degrees French degrees  
Clarke de-  
grees  
mmol/l  
mg/l (ppm)  
Water softener level  
(°dH)  
(°fH)  
47 - 50  
43 - 46  
37 - 42  
29 - 36  
84 - 90  
76 - 83  
65 - 75  
51 - 64  
8.4 - 9.0  
7.6 - 8.3  
6.5 - 7.5  
5.1 - 6.4  
835 - 904  
755 - 834  
645 - 754  
505 - 644  
58 - 63  
53 - 57  
46 - 52  
36 - 45  
10  
9
8
7
8
GeneralDetails
NameZANUSSI ZSFN121W3 Slimline Dishwasher
MakeZanussi
LanguageEnglish
FiletypePDF (Download)
File size0.81 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

ZANUSSI ZSFN121W3 Slimline Dishwasher