AEG FSB34707Z Dishwasher
Problem and alarm code
Possible cause and solution
The temperature of the water inside
the appliance is too high or malfunc‐
tion of the temperature sensor oc‐
curred.
•
Make sure that the temperature of the inlet water does not exceed
60°C.
Switch the appliance off and on.
•
•
The lights related to MY TIME
selection bar flash 6 times inter‐
mittently.
•
An acoustic signal sounds inter‐
mittently.
Technical malfunction of the appli‐
ance.
•
Switch the appliance off and on.
•
The lights related to MY TIME
selection bar flash 12 times in‐
termittently.
•
An acoustic signal sounds inter‐
mittently.
The level of water inside the appli‐
ance is too high.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height above the
floor. Refer to the installation instruction.
•
The lights related to MY TIME
selection bar flash 15 times in‐
termittently.
•
An acoustic signal sounds inter‐
mittently.
The appliance stops and starts
more times during operation.
•
•
It is normal. It provides optimal cleaning results and energy savings.
The programme lasts too long.
If the delay start option is set, cancel the delay setting or wait for the
end of the countdown.
•
•
Activating ExtraPower increases the programme duration.
Small leak from the appliance door.
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
•
•
The appliance door is not centred on the tub. Adjust the rear foot (if ap‐
plicable).
The appliance door is difficult to
close.
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
•
•
Parts of the tableware are protruding from the baskets.
The appliance door opens during
the wash cycle.
The AirDry function is activated. You can deactivate the function. Refer
to Basic settings chapter.
Rattling or knocking sounds from
the inside of the appliance.
•
The tableware is not properly arranged in the baskets. Refer to basket
loading leaflet.
•
•
Make sure that the spray arms can rotate freely.
The appliance trips the circuit-beak‐
er.
The amperage is insufficient to supply simultaneously all the applian‐
ces in use. Check the socket amperage and the capacity of the meter
or turn off one of the appliances in use.
•
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
44 ENGLISH
| General | Details |
|---|---|
| Name | AEG FSB34707Z Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.46 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
Fisher and Paykel DD24DT2NX9 Built-Under Dishwasher
Pelgrim GVW250XL Dishwasher
AMANA ADB1400AMS Undercounter Dishwasher
SIEMENS SE23HW64CG Full Size 14 Place Settings Dishwasher
FISHER AND PAYKEL DD60SHI9 Dishwasher
Hotpoint HDA2100HCC Dishwasher
BOSCH SMS2ITI04E 60 cm Free-standing Dishwasher
FRIGIDAIRE FDPH4316A Dishwasher
BOSCH SMV4HTX27G Dishwasher
FISHER PAYKEL DD24SCTB9_N Single DishDrawer Dishwasher