Home > AEG > AEG FSK76738P Dishwasher

AEG FSK76738P Dishwasher

ENGLISH  
15  
the total energy consumption of a  
Multi-tabs containing salt are  
not effective enough to  
soften hard water.  
programme by additional 2 Wh. The  
rinsing of the softener ends with a  
complete drain.  
Regeneration process  
Each performed softener rinse (possible  
more than one in the same cycle) may  
prolong the programme duration by  
another 5 minutes when it occurs at any  
point at the beginning or in the middle of  
a programme.  
For the correct water softener operation,  
the resin of the softener device needs to  
be regenerated regularly. This process is  
automatic and is the part of the normal  
dishwasher operation.  
When the prescribed quantity of water  
(see values in the table) has been used  
since the previous regeneration process,  
a new regeneration process will be  
initiated between the final rinse and the  
programme end.  
All the consumption values  
mentioned in this section are  
determined in line with the  
currently applicable standard  
in laboratory conditions with  
water hardness 2.5mmol/L  
(water softener: level 3)  
according to the regulation:  
2019/2022 / UK Ecodesign  
2021/745.  
Water softener levAmount of water  
el  
(l)  
250  
100  
62  
47  
25  
17  
10  
5
1
The pressure and the  
temperature of water as well  
as the variations of the  
mains supply can change  
the values.  
2
3
4
7.3 The rinse aid level  
5
The rinse aid helps to dry the dishes  
without streaks and stains. It is  
automatically released during the hot  
rinse phase. It is possible to set the  
released quantity of rinse aid.  
6
7
8
When rinse aid chamber is empty, the  
rinse aid indicator is on notifying to refill  
rinse aid. If the drying results are  
9
3
10  
3
satisfactory while using multi-tablets only,  
it is possible to deactivate the dispenser  
and the indicator. However, for best  
drying performance, always use rinse aid  
and keep the rinse aid indicator active.  
In case of the high water softener setting,  
it may occur also in the middle of the  
programme, before the rinse (twice  
during a programme). Regeneration  
initiation has no impact on the cycle  
duration, unless it occurs in the middle of  
a programme or at the end of a  
To deactivate the rinse aid dispenser and  
indicator, set the level of rinse aid to 0A.  
programme with a short drying phase. In  
such cases, the regeneration prolongs  
the total duration of a programme by  
additional 5 minutes.  
7.4 End sound  
You can activate an acoustic signal that  
sounds when the programme is  
completed.  
Subsequently, the rinsing of the water  
softener that lasts 5 minutes may begin  
in the same cycle or at the beginning of  
the next programme. This activity  
increases the total water consumption of  
a programme by additional 4 litres and  
GeneralDetails
NameAEG FSK76738P Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size1.19 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher