Home > AEG > AEG FSK76738P Dishwasher

AEG FSK76738P Dishwasher

14  
The appliance returns to the programme  
selection.  
The saved settings remain valid until you  
change them again.  
How to change a setting  
Make sure the appliance is in setting  
mode.  
1. Use Previous or Next to select the  
bar of the ECOMETER dedicated to  
the desired setting.  
7.2 The water softener  
The water softener removes minerals  
from the water supply, which would have  
a negative effect on the washing results  
and on the appliance.  
The bar of the ECOMETER  
dedicated to the chosen setting  
flashes.  
The display shows the current  
setting value.  
The higher the content of these minerals,  
the harder your water is. Water hardness  
is measured in equivalent scales.  
2. Press OK to enter the setting.  
The bar of the ECOMETER  
dedicated to the chosen setting is  
on. The other bars are off.  
The water softener should be adjusted  
according to the hardness of the water in  
your area. Your local water authority can  
advise you on the hardness of the water  
in your area. Set the right level of the  
water softener to assure good washing  
results.  
The current setting value flashes.  
3. Press Previous or Next to change  
the value.  
4. Press OK to confirm the setting.  
The new setting is saved.  
The appliance returns to the basic  
settings list.  
5. Press and hold simultaneously  
and  
for about 3  
seconds to exit setting mode.  
Water hardness  
German deFrench de‐  
grees (°dH) grees (°fH)  
mmol/l  
mg/l (ppm)  
Clarke  
degrees  
Water softener  
level  
47 - 50  
43 - 46  
37 - 42  
29 - 36  
23 - 28  
19 - 22  
84 - 90  
76 - 83  
65 - 75  
51 - 64  
40 - 50  
33 - 39  
8.4 - 9.0  
7.6 - 8.3  
6.5 - 7.5  
5.1 - 6.4  
4.0 - 5.0  
3.3 - 3.9  
835 - 904  
755 - 834  
645 - 754  
505 - 644  
395 - 504  
325 - 394  
58 - 63  
53 - 57  
46 - 52  
36 - 45  
28 - 35  
23 - 27  
10  
9
8
7
6
1)  
5
15 - 18  
11 - 14  
4 - 10  
<4  
26 - 32  
19 - 25  
7 - 18  
<7  
2.6 - 3.2  
1.9 - 2.5  
0.7 - 1.8  
<0.7  
255 - 324  
185 - 254  
70 - 184  
<70  
18 - 22  
13 - 17  
5 - 12  
< 5  
4
3
2
2)  
1
1)  
2)  
Factory setting.  
Do not use salt at this level.  
Regardless of the type of detergent  
used, set the proper water hardness  
level to keep the salt refill indicator  
active.  
GeneralDetails
NameAEG FSK76738P Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size1.19 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher