Amana ADB1400AGW Dishwasher

1

2

Dishwasher Quick Start Guide  

Cycle Guide  

OPERATING INSTRUCTIONS  

Step 1. Prepare and Load the  

Dishwasher  

See the Key Usage Tips for more information  

on loading the dishwasher.  

This information covers several different models. Your dishwasher may not have all of the cycles and  

options described.  

WARNING  

Cycles:  

Descriptions:  

Step 2. Add Detergent and Rinse Aid  

to the Dishwasher  

See the Key Usage Tips for more information  

on adding detergent and rinse aid.  

Heavy  

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and regular tableware.  

Includes a heated drying option.  

Normal  

This cycle is recommended for daily, regular, or typical use to completely wash and  

dry a full load of normally soiled dishes. This dishwasher’s government energy  

certifications were based on the Normal cycle with only the Heat Dry option  

selected.**  

Step 3. Check that All Arms Spin  

Freely  

Quick Wash  

For fast results, this cycle will clean dishes using slightly more water and energy. For  

improved drying, select a heated drying option.  

Tip Over Hazard  

Do not use dishwasher until completely  

installed.  

NOTE: Some detergents are not recommended for short wash cycles; please refer to  

your detergent packaging for more information.  

Do not push down on open door.  

**No other washing and drying temperature options were selected, and the dishwasher was not  

subjected to truncated testing. Rinse aid was not used, and there was no detergent used in the  

prewash.  

Doing so can result in serious injury or cuts.  

WARNING: To reduce the risk of fire, electric shock, or  

injury to persons, read the IMPORTANT SAFETY  

INSTRUCTIONS, located in your appliance’s Owner’s  

Manual, before operating this appliance.  

Online Ordering Information  

For detailed installation instruction and maintenance information, please see the Owner’s Manual  

included with your machine.For information on any of the following items, a full cycle guide, detailed  

product dimensions, or for complete instructions for use, installation, and warranty, please visit  

www.amana.com/owners, or in Canada www.amanacanada.ca/owners. This may save you the  

cost of a service call.  

Items in the rack can block the spray arms.  

Step 4. Select a Cycle and Options if Desired  

Efficient dishwashers run longer to save water and energy, just as driving a car slower saves on gas. Typical  

cycle time is approximately 2¹/₂ hours, but can take less or more time to complete depending on selections.  

Register  

Product  

Schedule  

Service  

How To’s  

& FAQ  

Manuals &  

Down-  

loads  

Add  

Service  

Plan  

Parts  

Accessories  

You can customize your cycles by selecting the options desired. If you change your mind, select the option  

again to turn off the option. Not all options are available for every cycle. If an invalid option is selected for a  

given cycle, the lights will flash. Adding options may increase the cycle time.  

NOTE: Cycles and Options vary by model; see online Cycle and Options Guide for more information.  

Step 5. Start or Resume a Cycle  

IMPORTANT: If anyone opens the door (such as for adding a dish, even during the Delay Hours option), the  

Start/Resume button must be selected each time.  

�

If the Start/Resume button is located on top of door, push the door firmly closed within 4 seconds of  

selecting Start/Resume. If door is not closed within 4 seconds, the Start/Resume button LED will flash, an  

audible tone will be heard, and cycle will not start.  

To contact us, use the information listed below for the appropriate region.  

�

If the Start/Resume button is located on front of door, push door firmly closed. The door latches  

automatically. Select the wash cycle, options, and then Start/Resume.  

United States:  

1–866–616–2664  

Canada:  

1–800–807–6777  

NOTE: Run hot water at the sink nearest your dishwasher until the water is hot. Turn off water.  

Amana Brand Home Appliances  

Customer eXperience Center  

553 Benson Road  

Amana Brand Home Appliances  

Customer eXperience Centre  

200–6750 Century Ave.  

NOTE: Select Start/Resume every time you add a dish.  

Benton Harbor, MI 49022–2692  

Mississauga, Ontario L5N 0B7  

Key Usage Tips  

Cleaning and Maintaining the Interior  

ADD RINSE AID  

Many detergents and Hard water may leave white spots or a  

white residue on dishware and on the interior of the dishwasher.  

Over time this residue can become unsightly and could affect  

dishwasher performance. Use of a dishwasher cleaning product  

such as affresh^® Dishwasher Cleaner can help to remove the  

residue. Monthly use of affresh^® Dishwasher Cleaner is  

recommended to help maintain the dishwasher. Follow package  

directions.  

�

Your dishwasher is designed to use rinse aid for good drying  

performance. Without rinse aid, your dishes and dishwasher interior  

will have excessive moisture. The heated drying option will not  

perform as well without rinse aid.  

Rinse aid keeps water from forming droplets that can dry as spots or  

streaks. It also improves drying by allowing water to drain off dishes  

after final rinse. Rinse aid does not adhere to dishware and, when  

used, it is dispensed during each cycle.  

�

Upper Rack  

Lower Rack  

ADD DETERGENT  

�

Check the rinse aid indicator with the door down (varies by  

model). Add rinse aid when indicator drops to “Add” level.  

PREPARE AND LOAD THE DISHWASHER  

Premeasured Detergents  

High-quality premeasured tablets and  

packs are recommended for improved  

performance.  

IMPORTANT: Remove leftover food, bones, toothpicks, and other  

hard items from dishes. Remove labels from containers before  

washing.  

�

�

Make sure when the dishwasher door is closed that no items  

are blocking the detergent dispenser.  

Items should be loaded with soiled surfaces facing down and  

inward toward the spray, as shown in the graphics above. This  

will improve cleaning and drying results. Angle dirtiest dish  

surfaces downward, allowing space for water to flow up through  

rack and between dishes.  

Avoid overlapping items like bowls or plates that may trap food.  

Place plastics, small plates, and glasses in upper rack.  

Wash only items marked “dishwasher safe.”  

To avoid thumping/clattering noises during operation, load  

dishes so they do not touch one another. Make sure lightweight  

load items are secured in racks.  

Use slots in the covers (if provided) and suggested loading  

patterns to keep your silverware separated for optimum wash.  

If your silverware does not fit into the  

designated slots, lift and slide covers off to  

remove them and mix silverware types to keep  

them separated.  

When loading silverware, always place sharp  

items pointing down and avoid “nesting” as  

shown.  

Quality tablets and packs have been  

proven better than powder, liquid, or  

gel detergents at reducing filming on  

dishes. Using tablets and packs over  

time will start to reduce or eliminate  

white film. They are suitable for all  

water hardness and soil levels. Also, by  

using a rinse aid, you can minimize  

repeat buildup of white film (not all  

packs and tablets contain rinse aid).  

Always place premeasured detergents  

in main compartment and close lid.  

�

�

Add rinse aid to hinged lid-style  

dispenser by twisting the dispenser  

cap 1/4 turn clockwise to open and  

lift off. Pour rinse aid into the  

opening until the indicator level is  

at “Full.” Replace the dispenser  

cap and turn to “Lock.” Make sure  

cap is fully locked.  

�

�

�

�

To add rinse aid to sliding lid-style  

dispenser, open the rinse  

NOTE: Follow instructions on the package when using other  

dishwasher detergent types. See the complete Owner’s Manual  

for more details about powders, liquids, and gels.  

dispenser lid by gently pushing in  

the center of the lid with your  

thumb and pulling up on the edge.  

Pour rinse aid into the opening until  

the dispenser is full. Then, close  

the dispenser by pushing down  

gently on the lid.  

�

�

�

Use automatic dishwasher detergent only. Add detergent just  

before starting a cycle.  

�

Fresh automatic dishwasher detergent results in better  

cleaning. Store tightly closed detergent container in a cool,  

dry place.  

If you are experiencing poor drying  

performance, you may want to try a  

higher setting. Turn the arrow adjuster  

to a higher number to increase the  

amount of rinse aid.  

�

FILTRATION SYSTEM  

IMPORTANT: To avoid damage to dishwasher, do not operate  

your dishwasher without filters properly installed. Be sure lower  

filter is securely in place and upper filter assembly is locked into  

place. If upper assembly turns freely, it is not locked into place.  

NOTE: Silverware basket may vary by model.  

NOTE: For most water conditions, the  

factory setting will give good results.  

Your dishwasher has the latest  

technology in dishwasher  

filtration. This filtration system  

FOLLOW THE PROGRESS OF YOUR DISHWASHER  

The Clean indicator glows when a cycle is finished.  

A

minimizes sound and optimizes  

water and superior cleaning. The  

filter system consists of two  

parts: an upper filter assembly  

and lower filter.  

RECOMMENDED DETERGENT  

The United States and Canada have passed a restriction limiting the  

amount of phosphorus (phosphates) in household dishwasher detergents.  

Major manufacturers have reformulated their dishwasher detergent for this  

change in detergents as another step in eco-conscious awareness. With  

these recent changes, it is recommended to use tablets and packs for  

convenience and improved performance.  

Silverware Basket  

B

ENERGY EFFICIENCY  

Energy efficiency is gained by extending cycle time and  

reducing the amount of wattage and water used during  

the dishwashing cycle. For exceptional cleaning, cycles  

are longer due to soak and pauses.  

A. Upper Filter  

Assembly  

B. Lower Filter  

Please scan the  

QR code to access  

the installation  

videos & the  

Efficient dishwashers run longer to save water and  

energy, just as driving a car slower saves on gas. Your  

first cycle will run longer to calibrate the optical water  

sensor.  

online-only items.  

W11538000C  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Amana ADB1400AGW Dishwasher
Make	Amana
Language	English
Filetype	PDF (Download)
File size	1.73 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Amana

Amana ADB1400AGW Dishwasher Overview

Summary of Contents

• Page 1: Dishwasher Quick Start Guide Prepare and load the dishwasher. See the Key Usage Tips for more information on loading the dishwasher. Add detergent and rinse aid to the dishwasher. Heavy cycle is for hard-to-clean, heavily soiled items. Check that all arms spin freely. Quick Wash cycle cleans dishes quickly using slightly more water and energy. Select a cycle and options if desired. Efficient dishwashers run longer to save water and energy. Start or resume a cycle. If the door is opened, the Start/Resume button must be selected each time. Add rinse aid for good drying performance. Rinse aid helps prevent spots and improves drying. Prepare and load the dishwasher properly. Ensure no items block the detergent dispenser. Use automatic dishwasher detergent only. Fresh detergent results in better cleaning. Your dishwasher has a filtration system. Do not operate without filters properly installed. Energy efficiency is gained by extending cycle time and reducing wattage and water usage.
• Page 2: Guide de démarrage rapide du lave-vaisselle Instructions d'utilisation Étape 1. Préparation et chargement du lave-vaisselle Consulter les conseils élémentaires d’utilisation pour plus d’informations sur le chargement du lave-vaisselle. Étape 2. Ajouter du détergent et de l’agent de rinçage dans le lave-vaisselle Consulter les conseils élémentaires d’utilisation pour plus d’informations sur l’ajout de détergent et d’agent de rinçage. Étape 3. Contrôle de la libre rotation de toutes les rampes d’aspersion Utiliser le programme Heavy pour les casseroles et la vaisselle très sales. Étape 4. Choisir un programme et des options, si désiré Les lave-vaisselle éconergiques fonctionnent plus longtemps pour économiser de l’eau et de l’énergie. Étape 5. Démarrer ou reprendre un programme Si l’on ouvre la porte, il faudra sélectionner le bouton Start/Resume chaque fois. Conseils élémentaires d’utilisation Ajouter de l’agent de rinçage pour un séchage satisfaisant. Système de filtration Ne pas faire fonctionner le lave-vaisselle si les filtres ne sont pas correctement installés.