ASKO DBI343ID.W.AU Dishwasher
Installation
Max. 950 mm
The drainage hose can also be connected to a connection nipple on the sink unit’s water trap. The
connection nipple must have an internal diameter of at least 14 mm.
The drainage hose may be extended by a maximum of 2.5 m (the total length of the drainage hose
must not exceed 4.5 m). Any joints and connecting pipes must have an internal diameter of at least
14 mm.
No part of the drainage hose may be more than 950 mm above the bottom of the dishwasher.
Attach the drainage hose with a hose clamp. Ensure that the drainage hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.
The supply pipe must be fitted with a water tap (stopcock). The water tap must be easily accessible,
so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water tap and allow the pressure to settle for a while.
Check that all connections are watertight.
NOTE!
Only cold water connection is suitable for this appliance.
The water pressure must be between 0.03 and 1.0 MPa.
Connecting a dishwasher to the water supply via certain types of pressure limiting valves may
restrict the water supply! This may cause the error message “Water inlet fault” to be displayed.
If the water pressure is higher than 1.0 MPa a pressure limiting valve must be fitted.
38
| General | Details |
|---|---|
| Name | ASKO DBI343ID.W.AU Dishwasher |
| Make | ASKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.51 MB |

ASKO DSD5444D Dishwasher

ASKO DFI8557MMXXL Dishwasher

ASKO DBI565IXXLS Logic Series 24 Dishwasher

ASKO DFI766UXXL.AU Dishwasher

ASKO DFI5558MKXXL Dishwasher

ASKO DFI777UXXL Dishwasher

ASKO D5636XXL Dishwasher

ASKO DFI544D Dishwasher

ASKO DFI7602MMXXL Dishwasher

ASKO D5233 Dishwasher
























































