ASKO DFI564XXL.U Dishwasher
Installation instructions
The drain hose can also be connected to a connection nipple on the sink unit's water trap. The
connection nipple must have an internal diameter of at least 1/2'' (14 mm).
The drain hose may be extended by a maximum of 87" (2.2 m) (the total length of the drain hose
must not exceed 177" (4.5 m)). Any joints and connecting pipes must have an internal diameter of
at least 1/2'' (14 mm).
No part of the drain hose may be more than 37 3/8'' (950 mm) above the bottom of the dishwasher.
Attach the drain hose with a hose clamp. Ensure that the drain hose has no kinks.
No external air gap is necessary, as the dishwasher is already equipped with an internal air gap.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.
The supply pipe must be fitted with a water supply valve. The water supply valve must be easily
accessible, so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water supply valve and allow the pressure to settle for
a while. Check that all connections are watertight.
Water supply
The machine can be connected to either a cold or a hot (max. 160 °F (70 °C)) water supply. The
water pressure should be 4.2-140 psi (0.03-1.0 MPa).
Connect to cold water
Connect the dishwasher to the cold water supply if the building is heated using oil, electricity, or
gas.
Connect to hot water
Connect the dishwasher to the hot water supply (max. 160 °F (70 °C)) if the building is heated using
an energy-efficient means such as district heating, solar power, or geothermal power. Choosing a
hot water connection reduces the dishwasher's energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware
cannot withstand high temperatures. See Fragile dishes in the chapter Loading the dishwasher.
Electrical connection
Information about the electrical connection can be found on the serial number plate. This specification
must match the electricity supply.
The power outlet for the appliance shall be installed in a cabinet or on a wall adjacent to the
undercounter space in which the appliance is to be installed. Do not use an extension cord for this
appliance.
The access hole for the electrical supply must be round and smooth and no bigger than 1 1/2''
(38 mm) in diameter. If the partition is metal, it needs to be covered with an edge protector.
Use caution when the appliance is installed or removed to reduce the likelihood of damage to the
power cord.
39
| General | Details |
|---|---|
| Name | ASKO DFI564XXL.U Dishwasher |
| Make | ASKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.44 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ASKO DSD5444D Dishwasher
ASKO DFI8557MMXXL Dishwasher
ASKO DBI565IXXLS Logic Series 24 Dishwasher
ASKO DFI766UXXL.AU Dishwasher
ASKO DFI5558MKXXL Dishwasher
ASKO DFI777UXXL Dishwasher
ASKO D5636XXL Dishwasher
ASKO DFI544D Dishwasher
ASKO DFI7602MMXXL Dishwasher
ASKO DBI343ID.W.AU Dishwasher
FISHER PAYKEL DD24SCTX9 N Dishwasher
MAYTAG PDBTT49AWW Dishwasher
FISHER and PAYKEL DW60UC2X Contemporary Builtunder Dishwasher
BOSCH SPS2HKW58E Dishwasher
FISHER PAYKEL DD60ST4HZB9 Single DishDrawer Dishwasher
BOSCH SMV4HTX03E Dishwasher
Siemens SX75YX00CE Fully Integrated Dishwasher
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
ASKO DBI565IXXLS Logic Series 24 Dishwasher
FISHER PAYKEL ADDD60DTPX Door Panel for Dishwasher