Home > Beko > BEKO BDFB1630W Dishwasher

BEKO BDFB1630W Dishwasher

3
Installation  
Refer to the nearest Authorised Service  
Agent for installation of your product. To  
make the product ready for use, make sure  
that the electricity, tap water supply and  
water drainage systems are appropriate  
before calling the Authorised Service Agent.  
If they are not, call a qualified technician  
and plumber to have any necessary  
arrangements carried out.  
Appropriate installation  
location  
Place the product on a solid and flat  
floor that has sufficient load carrying  
capacity! The product must be  
installed on a flat surface in order for  
the door to be closed comfortably and  
securely.  
Do not install the product at places  
where temperature may fall below 0ºC.  
Place the product at least 1 cm away  
from the edges of other furniture.  
Place the product on a rigid floor. Do  
not place it on a long pile rug or similar  
surfaces.  
Preparation of the location and  
electrical, tap water and waste  
C water installations at the place  
of installation is the customer's  
responsibility.  
Installation and electrical  
connections must be carried  
Do not place the product on the  
power cable.  
B out by the Authorised Service  
B
Agent. Manufacturer shall  
not be held responsible  
for damages arising from  
processes carried out by  
unauthorised persons.  
Make sure that you select a location  
that will allow you to load and unload  
the dishes in a fast and comfortable  
manner.  
Install the product in a place close to  
the tap and the drain hole. Select the  
installation location by considering  
that it will not be changed after the  
connections are made.  
Prior to installation, visually  
check if the product has any  
A defects on it. If so, do not have  
it installed. Damaged products  
cause risks for your safety.  
Make sure that the water inlet  
and discharge hoses are not  
Connecting water supply  
We recommend attaching a  
C folded, pinched or crushed  
filter on the house/apartment  
while pushing the product into  
its place after installation or  
cleaning procedures.  
C supply water inlet to protect  
the machine from damages  
that may arise from impurities  
(sand, dirt, rust, etc.) coming  
from the urban water supply  
system or from your own water  
system as well as to prevent  
complaints such as yellowing or  
sludge accumulation at the end  
of washing.  
When placing the product, pay attention  
not to damage the floor, walls, piping, etc.  
Do not hold the product by its door or panel  
to move it.  
/
EN  
9 / 44  
GeneralDetails
NameBEKO BDFB1630W Dishwasher
MakeBeko
LanguageEnglish
FiletypePDF (Download)
File size12.55 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
beko DUT25401WHW Front Pocket Handle Dishwasher
beko DUT25401WHW Front Pocket Handle Dishwasher
beko BDIN38522Q Dishwasher
beko BDIN38522Q Dishwasher
beko BDFN26450A Dishwasher
beko BDFN26450A Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFN26521XQ Dishwasher
beko BDFN26521XQ Dishwasher
NMG0724BEKODI Dishwasher
NMG0724BEKODI Dishwasher
beko 943711 Dishwasher
beko 943711 Dishwasher
beko DIN15210 Full-Size Dishwasher
beko DIN15210 Full-Size Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko BDIN38650C Dishwasher
beko BDIN38650C Dishwasher

BEKO BDFB1630W Dishwasher