bellini BDW96W, BDW96X Series 45cm Dishwasher
3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the
appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not
exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to
move or cause vibrations and noise while it is operation.
Connecting the water and electricity supplies
Connection to the water and electricity supplies should only be performed by a qualified
technician.
The dishwasher should not stand on top of the water hoses or the electricity supply cable
The appliance must be connected to the water supply network using new piping. Do not use old
piping.
Connecting the water inlet hose
Connect the cold water supply hose to a threaded 3/4(inch)
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that
the water is clear and free of impurities. If this precaution is
not taken, there is a risk that the water inlet can get blocked
and the appliance could be damaged.
Connecting the water outlet hose
Fit the drainage hose of your machine to the drainage pipe
without bending.
If the length of the hose is not sufficient, apply to the
authorized service for an extension made from the same
material as the original. Remember that the length of the
min 40mm
hose should not exceed 4meters even when with an
extension.
If the drainage hose is longer the 4 m. the dishes will not
be cleaned properly secure your hose firmly to the drainage
pipe to avoid it coming off during the washing process.
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
the socket is earthed and complies with current regulations;
the socket can withstand the maximum load of the appliance, which is indicated on the data plate
located on the inside of the door(see description of the appliance);
the power supply voltage falls within the values indicated on the data plate on the inside of the door;
the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised
technician to replace the plug (see assistance); do not use extension cables or multiple sockets.
For optional
19
| General | Details |
|---|---|
| Name | bellini BDW96W, BDW96X Series 45cm Dishwasher |
| Make | Bellini |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.97 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Bellini BDW504 Series 45cm and Dishwasher
Bellini BDWM48B Dishwasher
Electronic LG DFB512FP Dishwasher
BOSCH SHP78CM2N Pocket Handle Dishwasher
JennAir QQSCHIB Dishwasher
FISHER and PAYKEL ADDD24SPX Dishwasher
BOSCH SBH4ECX10E Dishwasher
BOSCH SMS2ITI41G Dishwasher
BOSCH SPV2HKX41E Dishwasher
BOSCH SBH4ITX12E Dishwasher
GE APPLIANCES GDF511PSR-PGR Dishwasher with Front Controls with Power Cord
BOSCH SHX53CM5N Dishwasher