Home > Bellini > bellini BDW96W, BDW96X Series 45cm Dishwasher

bellini BDW96W, BDW96X Series 45cm Dishwasher

Once the appliance has been installed, the power supply cable and the electrical socket should  
be easily accessible.  
The cable should not be bent or compressed.  
If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical  
Assistance Service in order to prevent all potential hazards.(See Assistance)  
The company shall not be held responsible for any incidents that occur if these regulations are  
not observed.  
Advice regarding the first wash cycle  
After the appliance has been installed, immediately before running the first wash cycle, completely  
fill the dispenser of Rinse (see Rinse aid ).  
Positioning the Appliance  
Position the appliance in the desired location. The back should rest against the wall behind it, and  
the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and  
drain hoses that can be positioned to the right or the left to facilitate proper installation.  
Leveling the Appliance  
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the  
dishwasher, making it level. In any case, the appliance should not be inclined more than 2  
NOTE: The maximum adjustment height of the feet is 20 mm.  
How to Drain Excess Water From Hoses  
.
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained directly  
into the sink. It will be necessary to drain excess water from hoses into a bowl or a suitable  
container that is held outside and lower than the sink.  
Water Outlet  
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.  
Ensure that the water inlet hose is not kinked or squashed.  
Extension Hose  
If you need a drain hose extension, observe to use a similar drain hose..  
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be  
reduced.  
Syphon Connection  
The waste connection must be at a height of between 50cm (minimum) and 100cm (maximum)  
from the bottom of the dish. The water drain hose should be fixed by a hose clip.  
20  
GeneralDetails
Namebellini BDW96W, BDW96X Series 45cm Dishwasher
MakeBellini
LanguageEnglish
FiletypePDF (Download)
File size0.97 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Bellini BDW504 Series 45cm and Dishwasher
Bellini BDW504 Series 45cm and Dishwasher
Bellini BDWM48B Dishwasher
Bellini BDWM48B Dishwasher

bellini BDW96W, BDW96X Series 45cm Dishwasher