Home > BLACK PLUS DECKER > BLACK Plus DECKER BDW200M Dishwasher
BLACK Plus DECKER BDW200M Dishwasher
ENGLISH
INSTALLATION INSTRUCTIONS
Step 1: Check the door balance
Caution:
• Opening the door of your dishwasher before it is installed will cause it to tip forward.
Do not open the door until you are ready to install your dishwasher.
• If it is necessary to open the door,
hold the top of the dishwasher
securely with one hand and hold
the door with the other hand.
1. Hold the top of the dishwasher
firmly.
2. Open the door slowly, then
release it. If the door drops,
increase the spring tension. If
the door closes, decrease the
spring tension.
3. Continue moving the spring
pin until the door is balanced.
Adjust both springs to the same
tension.
Step 2: Adjust the leveling legs
1. Move the dishwasher close to the installation location and lay it on its back.
NOTE: Make sure that the leveling feet are loosened before standing the dishwasher
upright. They may be tight from shipping/packaging.
2. Measure the installation height and the dishwasher height.
3. Extend the leveling legs out from the dishwasher base 0.25 in. (6.35 mm) less than
the installation height.
Page 10
| General | Details |
|---|---|
| Name | BLACK Plus DECKER BDW200M Dishwasher |
| Make | BLACK PLUS DECKER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.78 MB |

BLACK plus DECKER BDW300MHS Dishwasher

BLACK PLUS DECKER BDW200MW Dishwasher



































