Home > BLACK PLUS DECKER > BLACK Plus DECKER BDW200M Dishwasher
BLACK Plus DECKER BDW200M Dishwasher
ENGLISH
INSTALLATION REQUIREMENTS
Connecting the water line to the water supply
1. Turn off the water supply.
2. Install a hand shut-off valve in an accessible location, such as under the sink. This is
optional, but strongly recommended, and may be required by local codes.
3. Install the hot water inlet line, using at least 3/8 in. O.D. copper tubing. Route the
line as shown in the figure above and extend it forward at least 18 in. (45.72 cm)
from the rear wall of the enclosure.
4. Adjust the water heater to a temperature of 120° F to 150° F (49° C to 65° C).
5. Flush the water line to clean out any debris.
Note: The hot water pressure must be between 20 and 120 psi
(138 and 827 kPa).
Page 9
| General | Details |
|---|---|
| Name | BLACK Plus DECKER BDW200M Dishwasher |
| Make | BLACK PLUS DECKER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.78 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BLACK plus DECKER BDW300MHS Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher
dacor DDW24G9000AP Dishwasher
SIEMENS SN55ZS02BD Dishwasher
BOSCH SMI2ITS33E-6 Dishwasher
BOSCH SGV2ITX22G Dishwasher
Westinghouse WSF6606XB Dishwasher
BOSCH SMS2HVI02E Dishwasher
LG SDWB24S3 STUDIO Smart Dishwasher
FISHER and PAYKEL DW60UT4HI2 Tall Dishwasher
lord D3 Dishwasher
CMA DISHMACHINES CMA H-1X Undercounter Dishwasher