Home > BLACK PLUS DECKER > BLACK Plus DECKER BDW200M Dishwasher

BLACK Plus DECKER BDW200M Dishwasher

ENGLISH  
INSTALLATION REQUIREMENTS  
Cabinet preparation and wire routing  
• The wiring may enter the opening from either side, the rear, or the floor within  
the shaded area.  
• The electrical connection is on the front right of the dishwasher.  
• Drill a 1.5 in. (3.81 cm) maximum diameter hole to run the electrical cable  
through the wall of the cabinet.  
• The hole must be free of sharp edges. If the cabinet wall is metal, the hole edge  
must be covered with a bushing or rubber grommet.  
• Cable direct connections may pass through the same hole as the drain hose and  
hot water line, but power cords with plugs must pass through a separate hole.  
Preparing the hot water line  
• The water connection is on the left side of dishwasher.  
• The hot water line may enter the opening from either side, the rear, or the floor  
within the shaded area.  
• The hot water line may pass through the same hole as the electrical and drain hose.  
Or, you can drill an additional 1.5 in. (3.81 cm) maximum diameter hole for the hot  
water line.  
• If a power cord with a plug is used, the hot water line may not pass through the  
same hole as the power cord.  
Page 8  
GeneralDetails
NameBLACK Plus DECKER BDW200M Dishwasher
MakeBLACK PLUS DECKER
LanguageEnglish
FiletypePDF (Download)
File size0.78 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BLACK plus DECKER BDW300MHS Dishwasher
BLACK plus DECKER BDW300MHS Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher

BLACK Plus DECKER BDW200M Dishwasher