Home > BLACK PLUS DECKER > BLACK Plus DECKER BDW200M Dishwasher

BLACK Plus DECKER BDW200M Dishwasher

ENGLISH  
INSTALLATION INSTRUCTIONS  
Step 5: Install the 90° water supply elbow  
1. Wrap the male thread of the 90° elbow with Teflon thread seal tape twice. Do not  
use plumber’s putty.  
2. Install the 90° elbow onto the water valve. Do not overtighten the 90° elbow. The  
water valve bracket could bend or the water valve fitting could break.  
3. Position the end of the elbow to face the floor when the dishwasher is upright.  
Adjustable wrench  
90o fitting (3/4”). The other end should  
be sized to fit the water supply line.  
Teflon thread  
seal tape  
Step 6: Install the drain hose  
1. Make sure that the leveling feet are loosened before standing the dishwasher  
upright. They may be tight from shipping/packaging.  
2. Turn the dishwasher upright.  
3. Slide a screw-type hose clamp onto the right-angled end of the drain hose.  
4. Install the drain hose to the dishwasher drain outlet on the back of the dishwasher,  
then tighten the screw-type hose clamp.  
Back of dishwasher  
Phillips screwdriver  
Screw-type hose  
clamps  
Drain hose  
Drain hose installation  
hole  
Page 13  
GeneralDetails
NameBLACK Plus DECKER BDW200M Dishwasher
MakeBLACK PLUS DECKER
LanguageEnglish
FiletypePDF (Download)
File size0.78 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BLACK plus DECKER BDW300MHS Dishwasher
BLACK plus DECKER BDW300MHS Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher

BLACK Plus DECKER BDW200M Dishwasher