Home > BLACK PLUS DECKER > BLACK Plus DECKER BDW200M Dishwasher
BLACK Plus DECKER BDW200M Dishwasher
ENGLISH
INSTALLATION REQUIREMENTS
Caution:
• An air gap MUST BE USED if the drain hose is connected to a waste tee or garbage
disposal lower than 18 in. (45.72 cm) above the floor.
• Failure to provide the proper drain connection height with an air gap or 32 in. (81.28
cm) (min.) high drain loop will result in improper draining of the dishwasher.
Install the waste tee or garbage disposal connection and air gap according to
manufacturer’s instructions.
Method 1 - Air gap with a waste tee or garbage disposal connection
Method 2 - High drain with a waste tee or garbage disposal connection
You must provide a method to attach the drain hose to the underside of the
countertop.
Electrical requirements
• This appliance must be supplied with 120V, 60 Hz, and it must be connected
to its own, properly grounded branch circuit that is protected by a 15 or 20
ampere circuit breaker or time delay fuse.
• Wiring must be two wire with ground.
• If the electrical supply does not meet the above requirements, call a licensed
electrician before proceeding.
WARNING
• Remove the house fuse or open the circuit breaker before beginning
the installation. Do not use an extension cord or adapter plug with this
appliance.
Page 6
| General | Details |
|---|---|
| Name | BLACK Plus DECKER BDW200M Dishwasher |
| Make | BLACK PLUS DECKER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.78 MB |

BLACK plus DECKER BDW300MHS Dishwasher

BLACK PLUS DECKER BDW200MW Dishwasher



































