BOSCH SMV25FX01R Dishwasher

1

2

en  

Short and handy...  

Overview of water hardness settings  

Setting water softening system  

Programs  

... everything your dishwasher needs.  

You can find an overview of the water hardness values that can be  

The program data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the program and additional function  

selected.  

The runtime will change if the rinse  

aid system is switched off or rinse aid  

needs to be added.  

1. Press  

2. Press and hold and  

and flash.  

3. Release buttons.  

4. repeatedly until the required level  

has been set.  

.

Before using for the first time, make sure you read both the op- selected here.  

until  

erating and the installation instructions.  

A table of country-specific units can be found in the instruction  

manual.  

Hardness mmol/l  

range  

Level  

LED A  

LED B  

LED C  

0, 1, 2 or 3 LEDs will light up ac-  

cordingly.  

Soft  

Medium  

Hard  

0 - 1.1  

0

1

2

3

1.2 - 2.9  

3.0 - 3.7  

3.8 - 6.2  

5. Press  

to save the setting.  

a The LEDs go out.  

Program  

1) Duration [h:min]  

2) Energy [kWh]  

3) Water [l]  

Hard  

1) 1:30 - 2:40  

2) 0,950 _ 1,600  

3) 7 - 18  

1) 3:30  

2) 1,000  

3) 9,5  

/

Auto 45-65°  

/

Adding special salt  

Eco 50°  

1) 4:00  

2) 1,090  

3) 10  

1) 1:00  

2) 1,300  

3) 10  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

NightProgram¹  

1 hr Programme  

1

Suitable programme for running at night: it  

takes longer, but is extremely quiet.  

4. Place the lid back on the dispenser and turn to  

close.  

Adding rinse aid  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

2

aid  

and lift  

.

max  

1

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 ml  

25 ml  

15 ml  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

approx. 3 seconds.  

The programme is cancelled and ends after ap-  

prox. 1 minute.  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

.

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMV25FX01R Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMV25FX01R Dishwasher Overview

Summary of Contents

• Page 1: Short and handy overview of water hardness settings. Setting water softening system. You can find an overview of the water hardness values. The program data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the program and additional function selected. Before using for the first time, make sure you read both the operating and the installation instructions. To avoid damage to the appliance, only add special salt to the dispenser just before the programme starts. Suitable programme for running at night: it takes longer, but is extremely quiet. How to use your appliance: Load the tableware, add detergent, switch on the appliance, select the programme, start the programme, remove the tableware at the end. Only clean tableware that is suitable for dishwashers.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system and clean the filter elements under running water. Re-assemble the filter system and insert it into the appliance. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages under running water. Insert the lower spray arm and the upper spray arm firmly in place. Clean wastewater pump Disconnect the appliance from the power supply before cleaning. Remove any remnants of food and foreign bodies in the area of the impeller. Troubleshooting Display for water supply lights up if the supply hose is kinked or filters are soiled. Turn on the water tap and clean the filters if necessary. Rust spots on cutlery may indicate insufficient rust resistance or washing with rusting items. Detergent residue may be present if spray arms are blocked or filters are soiled.