EdgeStar DWP63BL Countertop Dishwasher
If your existing Faucet Adapter is not compatible with the “quick connect” hose assembly supplied, then the following
procedures should be followed:
Connecting the Dishwasher
• Connect the Faucet Adapter (included with dishwasher) to your faucet.
Inlet
Hose
Drain
Hose
Faucet
Adapter
Quick
Connect
Your dishwasher comes equipped with a Faucet Adapter, Quick Connect, Drain Hose, and Inlet Hose. The Faucet
Adapter must be installed on the faucet before you can connect the dishwasher. This adapter comes packaged inside
your dishwasher.
• If your faucet is inclusive of a ‘female’ type (threaded) connection, both rubber washers must be installed inside the
faucet adapter.
• If your faucet is inclusive of a ‘male’ type (threaded) connection, use only the standard rubber washer (0.2”/5mm thick)
supplied within the adapter. Remove the second rubber washer.
The Faucet Adapter is compatible with faucets inclusive of either male (outside) or female (inside) threaded faucet
connections.
For Best Results:
1. Screw the Faucet Adapter onto (or into) the faucet
tap. Check for leaks (use Teflon or plumbers tape to
eliminate any leaks if necessary).
Your dishwasher cleans by spraying a mixture of clean hot water and detergent (under pressure) against the soiled
surfaces of dishes. The water is pumped through a rotating spray arm, drained through a filter (removing food and soiled
particles) and pumped back through the spray arm. Soiled water is pumped out and replaced with clean water at the end
of each cycle (the number of times this is repeated depends on the wash cycle chosen)
2. Connect the six-sided connection of the drain hose to
the drain port connection on the back of the dishwasher
cabinet. To avoid damage to threads, do not over-
tighten.
3. Connect the star-shaped connection of the inlet hose to
the inlet port on the back of the dishwasher cabinet. Do
not over-tighten.
Notes:
• Hard water conditions will adversely affect the washing performance of your dishwasher.
• Hard water conditions will also contribute to ‘lime’ (white film substance) deposits and/or ‘scaling’ on the
stainless steel surface of the dishwasher tub and heater element, located in the sump underneath the
removable filter screen. To assist in minimizing these conditions, it is recommended to periodically operate/
rinse the inside of the dishwasher (empty) using one (1) cup of white vinegar at least once a week.
4. Connect the circular connection of the drain hose
onto the longer (bottom) male connection on the
Quick Connect.
5. Connect the circular connection of the inlet hose onto
the shorter (top) male connection on the Quick Connect.
6. Attach the Quick Connect assembly onto the Faucet
Adapter, by pulling down the outer locking collar on
the Quick Connect, while pushing the quick connect
assembly upward onto the Faucet Adapter.
7. Release the locking collar when the quick-connect
assembly snaps onto the Faucet Adapter. Verify the
connection is secure.
8. Slowly open the hot water line and check for any sign
of water leaks at all connections. If leaks are located,
immediately close the water supply and repair the hose
connections.
8
9
| General | Details |
|---|---|
| Name | EdgeStar DWP63BL Countertop Dishwasher |
| Make | EDGESTAR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.5 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EdgeStar DWP63BL Dishwasher
Whirlpool W11389327B Portable Dishwasher
FISHER AND PAYKEL DD24DT2NX9 Contemporary Tall Dishwasher
Miele G 5058 SCVi SFP Dishwasher
FISHER PAYKEL DD60SDFHX9 Dishwasher
Respekta GSP60TIDM Dishwasher
SAMSUNG DW60M6055FG-SA Free Standing Dishwasher
Hotpoint H8I HP42 Fully Integrated Dishwasher
Bertazzoni DW24T3IXV Dishwasher
Whirlpool WFC 3C26 60 cm Dishwasher
BOSCH SMV4HTX27G Dishwasher