Home > ETA > ETA 238090000C Dishwasher

ETA 238090000C Dishwasher

EN  
HOW TO DRAIN EXCESS WATER FROM HOSES  
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained  
directly into the sink. It will be necessary to drain excesswater from hoses into a bowl  
or suitable container that is held outside and lower than the sink.  
WATER OUTLET  
Connect the water drain hose.  
The drain hose must be correctly fitted to avo id water leaks.  
Ensure that the water inlet hose is not kinked or squashed.  
EXTENSION HOSE  
If you need a drain hose extension, observe to use a simil ar dr ain hose.  
It must be no longer than 4 metres; otherwise the cleaning effect of the dishw asher  
could be reduced.  
SYPHON CONNECTION  
The waste connection must be at a height of max.100  
cm from the bottom of the dish.  
The water drain hose should be fixed by a hose clip.  
Start of dishwasher  
The followings should be checked before starting the  
dishwasher.  
1.Whether the dishwasher is level and fixed  
2.Whether the inlet valve is opened  
3.Whether there is leakage at the connections of the  
conducts  
4.Whether the wires are tightly connected  
5.Whether the power is switched on  
6.Whether the inlet and drain hoses are knotted  
7.All packing materials and printings should be taken out from the dishwasher  
EN - 97  
GeneralDetails
NameETA 238090000C Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size11.31 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 339490001B Dishwasher
ETA 339490001B Dishwasher
ETA 274890010D Dishwasher
ETA 274890010D Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 338290000B Dishwasher
eta 338290000B Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

ETA 238090000C Dishwasher