Home > ETA > ETA 238090000C Dishwasher

ETA 238090000C Dishwasher

EN  
Problem  
Possible Causes  
What To Do  
This has no inuence on the dishwasher  
function.  
if in doubt, contact a suitably qualied  
plumber.  
This may be caused by on-site  
installation or the cross-section  
of the piping.  
Knocking noise in  
the water pipes  
Stained tub  
Detergent with colourant was  
Make sure that the detergent is the one  
interior  
used  
without colourant.  
Load the dishwasher as suggested  
in the directions.  
Improper loading  
Increase the amount of rinse-aid/rell  
the rinse-aid dispenser  
Too little rinse-aid  
Do not empty your dishwasher immediately  
after  
washing. Open the door slightly so that the  
steam can escape. Begin unloading the  
dishwasher only once t he dishes are barely  
warm to the touch. Empty the low basket  
rst. This prevents water form dropping off  
dishesin the upper basket.  
Dishes are removed too soon  
The dishes are  
not drying  
In short program the washing temperature  
is lower. This also lowers cleaning  
performance. Choose a program with a long  
washing time.  
Wrong program has been  
selected  
Water drainage is more dicult with these  
items. Cutlery or dishes of this type are not  
suitable for washing in the dishwasher.  
Use of cutlery with a low-quality  
coating  
The dishes were not loaded  
See notes in “Loading the Dishwasher  
correctly.  
Baskets“.  
The programme was not  
Select a more intensive programme. See“  
powerful enough.  
Wash Cycle Table „.  
Not enough detergent was  
Use more detergent, or change your  
dispensed.  
detergent.  
The dishes are  
not clean  
Items are blocking the path of  
spray arms.  
Rearrange the items so that the spray can  
rotate freely.  
The lter combination in the  
base of wash cabinet is not  
clean or  
Clean and/or t the lter combination  
correctly.  
is not correctly tted. This may  
Clean the sp ay arm jets. See „Cleaning  
cause the sp ay arm jets to get the Spray Arms“.  
blocked.  
The aected items are not corrosion resistant.  
A programme was not run after Always run the quick wash programme  
There are rust  
stains on cutlery  
dishwasher salt was added.  
Traces of salt have gotten into  
the wash cycle.  
without any crockery in the dishwasher  
and without selecting the Turbo function (if  
present), after adding dishwasher salt.  
The lid of the softer is loose  
Check the lip .Ensure the fix is ne.  
EN - 99  
GeneralDetails
NameETA 238090000C Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size11.31 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 339490001B Dishwasher
ETA 339490001B Dishwasher
ETA 274890010D Dishwasher
ETA 274890010D Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 338290000B Dishwasher
eta 338290000B Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

ETA 238090000C Dishwasher