Home > ETA > ETA 274890010D Dishwasher

ETA 274890010D Dishwasher

EN  
When to Refill the Rinse Aid Dispenser  
• If there is rinse-aid warning light in the control panel.et below 1/4 full.  
• As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator  
changes, as illustrated below.  
ATTENTION!  
Clean up any rinse aid split during filling with an absorbent  
cloth to avoid excess foaming during the next wash.  
Adjusting rinse aid dispenser  
ADJUSTING RINSE AID DISPENSER  
Follow the below steps:  
1. Close the door, switch on the appliance.  
2. Within 60 seconds after step 1, press the PROGRAM button (5) more than 5 seconds,  
the hardness setting H will appear on the display. Then press the DELAY button (4) to  
enter the set mode, The display will show d3.  
3. Press the PROGRAM button (5) to select the proper set according to your using habits,  
the sets will change in the following sequence: d3>d4>d5>d1>d2>d3.  
The higher the number, the more rinse aid the dishwasher uses.  
4. Without operation in 5 seconds or press the POWER button (1) to exit the set mode, the  
set success.  
NOTE  
Increase the dose if there are drops of water or lime spots on the  
dishes after washing. Reduce it if there are sticky whitish streaks  
on the dishes or a bluish film on glassware or knife blades.  
EN - 80  
GeneralDetails
NameETA 274890010D Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size24.98 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 339490001B Dishwasher
ETA 339490001B Dishwasher
ETA 238090000C Dishwasher
ETA 238090000C Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 338290000B Dishwasher
eta 338290000B Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

ETA 274890010D Dishwasher